{"title":"New Closeout Car Audio Deals","description":"\u003cp\u003eNew discontinued and closeout car audio products. Quantities are limited and final-sale terms apply where stated.\u003c\/p\u003e","products":[{"product_id":"mmats-dtx-10-midrange-with-1-threaded-rear-for-driver","title":"MMATS Pro Audio DT10X 10-Inch Midbass\/Midrange Speaker — Brand Closeout","description":"\u003ch2\u003eMMATS Pro Audio DT10X 10-Inch Midbass\/Midrange Speaker\u003c\/h2\u003e\u003cp\u003eBuilding a loud door, stunt wall or rear-panel setup and need a 10-inch driver that can carry real midbass into strong vocals instead of acting like a small subwoofer? That is where the DT10X fits. MMATS built the DT Series around fast midbass and midrange output, with the DT10X leaning a little more toward the vocal range while still giving you useful punch down low.\u003c\/p\u003e\u003cp\u003eMMATS rates the DT10X from 60 Hz to 6 kHz at 300 watts RMS \/ 600 watts program. The 2.5-inch edge-wound aluminum voice coil, Kapton former, 70-ounce magnet and flat-spider suspension are there to keep the driver controlled when the system is being pushed. This is the kind of speaker we would use when the goal is strong door or panel output with vocals that stay present, then let the subwoofer system handle the actual low bass.\u003c\/p\u003e\u003cp\u003eThe DT Series also has a specific design history. MMATS says the soft parts were sourced from the original EV Prosound lineage that inspired the series, with the frame and motor structure changed for the MMATS version. MMATS recommends a 12 dB\/octave low-pass setting in the 4–5 kHz range, which tells you how they expect this driver to be used: as the midbass\/midrange section feeding a proper high-frequency driver above it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a subwoofer and it is not a full-range speaker by itself. It will not give you deep bass below the midbass range, and the top end should be handed off to a tweeter or compression driver rather than asking the DT10X to carry the entire system. A 10-inch pro-audio driver also needs the correct mounting depth, panel strength and airspace; it is not automatically a drop-in replacement for a factory door speaker.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: DT10X\u003c\/li\u003e\n\u003cli\u003eProduct type: 10-inch midbass\/midrange driver\u003c\/li\u003e\n\u003cli\u003eFrequency response: 60 Hz–6 kHz\u003c\/li\u003e\n\u003cli\u003ePower handling: 300 watts RMS\u003c\/li\u003e\n\u003cli\u003eProgram power: 600 watts\u003c\/li\u003e\n\u003cli\u003eVoice coil: 2.5-inch edge-wound aluminum\u003c\/li\u003e\n\u003cli\u003eVoice-coil former: Kapton\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 70 ounces\u003c\/li\u003e\n\u003cli\u003eSuspension: flat spider\u003c\/li\u003e\n\u003cli\u003eManufacturer-recommended low-pass crossover: 4–5 kHz at 12 dB\/octave\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MMATS Pro Audio","offers":[{"title":"Default Title","offer_id":51160334008553,"sku":"MMATS-DTX-10","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/mmats-dt10x-official-front-quarter_24d59f30-caba-4496-bac7-3e7d26a9b05e.jpg?v=1782252952"},{"product_id":"brand-closeout-db-drive-p7cdt1-75-1-75-inch-titanium-compression-driver-single","title":"DB Drive P7CDT1.75 1.75-Inch Titanium Compression Driver — Single — Brand Closeout","description":"\u003ch2\u003eDB Drive P7CDT1.75 1.75-Inch Titanium Compression Driver — Single\u003c\/h2\u003e\u003cp\u003eBuilding a pro-audio horn section and need the vocals and top end to stay clear once the system gets loud? That is where the P7CDT1.75 fits. This is the compression driver that attaches to a compatible horn or waveguide and creates the high-efficiency output a normal dome tweeter is not designed to deliver in a loud door, stunt-wall, or other high-output system.\u003c\/p\u003e\u003cp\u003eThe 104 dB sensitivity is the number that matters here. DB Drive rates the driver at 150 watts nominal and 500 watts maximum, but because it is so efficient, the goal is not just throwing amplifier power at it. The amplifier, crossover, and horn all need to be matched so the driver stays clean in the range assigned to it. Its 8-ohm impedance also needs to be accounted for when choosing the amplifier channel and when multiple compression drivers share a channel.\u003c\/p\u003e\u003cp\u003eThe P7CDT1.75 uses a titanium diaphragm, 1.75-inch \/ 44 mm voice coil, and 22 oz. magnet. DB Drive lists its PBRH horn family as 1-3\/8-inch \/ 35 mm, 18-TPI universal-fit horns and shows the compression drivers with the horns sold separately. That lets the horn size and dispersion be selected around the installation instead of treating the compression driver as a complete speaker by itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is the compression driver only. A compatible horn or waveguide is required and sold separately. It is not a full-range speaker. High-pass filtering needs to be chosen around the horn, amplifier power, and complete system design.\u003c\/p\u003e\u003ch3\u003eBrand Closeout\u003c\/h3\u003e\u003cp\u003eThis is a final-sale brand-closeout listing. Buy it because the P7CDT1.75 is the right 8-ohm compression driver for the horn section you are building, not simply because the closeout price is lower. Confirm the horn interface, crossover plan, amplifier load, and required quantity before purchase.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: P7CDT1.75\u003c\/li\u003e\n\u003cli\u003eType: PRO Audio titanium-dome compression driver\u003c\/li\u003e\n\u003cli\u003eVoice-coil diameter: 1.75 inches \/ 44 mm\u003c\/li\u003e\n\u003cli\u003eNominal power: 150 watts\u003c\/li\u003e\n\u003cli\u003eMaximum power: 500 watts\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 ohms\u003c\/li\u003e\n\u003cli\u003eSensitivity: 104 dB\u003c\/li\u003e\n\u003cli\u003eMagnet weight: 22 oz.\u003c\/li\u003e\n\u003cli\u003eDiaphragm: titanium\u003c\/li\u003e\n\u003cli\u003eHorn \/ waveguide: required and sold separately\u003c\/li\u003e\n\u003cli\u003eReplacement diaphragm: P7CDT1.75RC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DB Drive","offers":[{"title":"Default Title","offer_id":51699653935337,"sku":"P7CDT1.75","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/db-drive-p7cdt1-75.jpg?v=1787263059"},{"product_id":"brand-closeout-db-drive-p8tw2fph-wdx-pro-2-inch-phenolic-compression-driver-single","title":"DB Drive P8TW2FPH WDX PRO 2-Inch Phenolic Compression Driver — Single — Brand Closeout","description":"\u003ch2\u003eDB Drive P8TW2FPH WDX PRO 2-Inch Phenolic Compression Driver — Single\u003c\/h2\u003e\u003cp\u003eBuilding a horn-loaded vocal section and need more output through the vocal range than a small tweeter can give you? That is where the P8TW2FPH makes sense. DB Drive built this 2-inch phenolic compression driver around vocal-midrange through high-frequency reproduction, so it fits a pro-audio system where you want voices and instruments to project cleanly through a proper waveguide.\u003c\/p\u003e\u003cp\u003eThe phenolic diaphragm is the reason to look at this version instead of automatically choosing the titanium P8TW2FT. DB Drive describes the P8TW2FPH as being focused on the vocal midrange bandwidth with extended response into the highs. The 8-ohm load also gives us useful options when multiple compression drivers are being wired to a dedicated amplifier channel.\u003c\/p\u003e\u003cp\u003eThis is a 4-bolt driver for a 2-inch-throat waveguide. DB Drive lists it for use with compatible horns such as the P9TWLH, P9TWSH, PHT6 and PHT9, while the standard 4-bolt pattern gives us other compatible waveguide options as well. The aluminum resonance chamber and ferrite-oxide motor are part of the driver assembly; the horn itself is separate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a complete horn by itself and it is not a full-range speaker. A compatible 4-bolt, 2-inch-throat waveguide is required. Amplifier power and high-pass filtering need to be chosen around the complete horn\/driver combination and the actual system design.\u003c\/p\u003e\u003ch3\u003eBrand Closeout\u003c\/h3\u003e\u003cp\u003eThis is a final-sale brand-closeout listing. The closeout price only makes sense if a phenolic 2-inch, 8-ohm compression driver is what the horn section actually needs. Confirm waveguide fit, amplifier load, crossover strategy, and quantity before purchase.\u003c\/p\u003e\u003ch3\u003eManufacturer Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: P8TW2FPH\u003c\/li\u003e\n\u003cli\u003eType: WDX PRO phenolic compression driver\u003c\/li\u003e\n\u003cli\u003eDiaphragm: 2-inch phenolic\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 ohms\u003c\/li\u003e\n\u003cli\u003eMotor: ferrite oxide\u003c\/li\u003e\n\u003cli\u003eAluminum resonance chamber\u003c\/li\u003e\n\u003cli\u003eMounting pattern: 4 bolt\u003c\/li\u003e\n\u003cli\u003eHorn interface: compatible 4-bolt, 2-inch-throat waveguide\u003c\/li\u003e\n\u003cli\u003eDesigned for extended vocal-midrange through high-frequency response\u003c\/li\u003e\n\u003cli\u003eReplacement diaphragm \/ recone support: available from DB Drive\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eManufacturer Dimensions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOverall diameter: 5.27 inches \/ 134 mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 2.52 inches \/ 63.97 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DB Drive","offers":[{"title":"Default Title","offer_id":51699653968105,"sku":"P8TW2FPH","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/db-drive-p8tw2fph.png?v=1787263065"},{"product_id":"brand-closeout-pac-srk-ram13h-heigh10-integration-installation-kit-for-ram","title":"PAC RAM HEIGH10 Radio Integration \u0026 Installation Kit — Closeout — SRK-RAM13H","description":"\u003ch2\u003ePAC SRK-RAM13H RAM HEIGH10 Radio Integration \u0026amp; Installation Kit\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eA HEIGH10 can fill the opening in these RAM trucks. SRK-RAM13H is what keeps the truck from losing the factory functions that were tied to the radio we just removed.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOn the supported RAM applications, the original radio is tied into more than music. Climate controls, steering-wheel controls, cameras, factory-amplifier behavior and vehicle settings can all be part of the factory screen. SRK-RAM13H combines the dash hardware and RadioPRO Advanced integration needed to put a Stinger HEIGH10 in the truck without treating all of those functions like separate problems afterward.\u003c\/p\u003e\u003ch3\u003eMore Than a Dash Kit\u003c\/h3\u003e\u003cp\u003eThe value is that PAC designed the physical and electronic sides together. Factory-matched plastics mount the HEIGH10 in the dash, while the CH4A-SRK integration module and vehicle-specific harnessing handle the supported RAM data and retained functions.\u003c\/p\u003e\u003cp\u003eOn compatible trucks, the HEIGH10 can display and control supported climate functions, show vehicle information and performance gauges, display tire pressures and door\/engine information, and provide access to supported customizable vehicle settings. Factory steering-wheel controls, amplifier integration and supported backup\/cargo cameras can remain part of the finished install as well.\u003c\/p\u003e\u003ch3\u003eWhere This Kit Makes Sense\u003c\/h3\u003e\u003cp\u003eIf the goal is specifically a HEIGH10 in the supported RAM body style, buying the matched integration package makes more sense than piecing the install together from a generic dash kit, separate data interface, camera adapter and steering-wheel-control module.\u003c\/p\u003e\u003cp\u003eThe kit also includes the smaller parts that usually become the last-minute problems in a radio swap: antenna adapters, USB retention hardware, camera retention and an external chime speaker for the supported application.\u003c\/p\u003e\u003ch3\u003eFitment Still Needs to Match the Exact Truck\u003c\/h3\u003e\u003cp\u003ePAC’s current product listing specifies \u003cstrong\u003e2013–2018 RAM Truck and 2019–2023 RAM Classic\u003c\/strong\u003e. The Classic body-style distinction matters; this kit is not a blanket fitment claim for every newer RAM simply because the model year falls in that window.\u003c\/p\u003e\u003cp\u003eWe still verify the exact year, body style, factory radio and equipment before ordering. PAC also states that SRK-RAM13H is \u003cstrong\u003enot compatible with manual-transmission vehicles\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThe Stinger HEIGH10 itself is sold separately. This is the vehicle integration and installation package that makes the supported radio swap work correctly.\u003c\/p\u003e\u003ch2\u003eManufacturer Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SRK-RAM13H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e PAC RadioPRO Advanced HEIGH10 integration and installation kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent published coverage:\u003c\/strong\u003e 2013–2018 RAM Truck and 2019–2023 RAM Classic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission restriction:\u003c\/strong\u003e Not compatible with manual-transmission vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM radio support:\u003c\/strong\u003e Compatible supported base, 5-inch and 8.4-inch factory radio configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetained functions:\u003c\/strong\u003e Supported steering-wheel controls, factory-amplifier integration, climate functions, vehicle information and factory camera functions where equipped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle outputs:\u003c\/strong\u003e Supported vehicle-speed, illumination, reverse and parking-brake signals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFactory-matched HEIGH10 mounting dash plastics\u003c\/li\u003e\n\u003cli\u003eCH4A-SRK RadioPRO Advanced vehicle-integration module\u003c\/li\u003e\n\u003cli\u003ePAC-Link adapter for Stinger multimedia units\u003c\/li\u003e\n\u003cli\u003eHigh-definition factory-camera retention module\u003c\/li\u003e\n\u003cli\u003eVehicle-specific plug-and-play wiring harness\u003c\/li\u003e\n\u003cli\u003eSatellite-radio antenna adapter\u003c\/li\u003e\n\u003cli\u003eAM\/FM antenna adapter\u003c\/li\u003e\n\u003cli\u003eUSB retention cables\u003c\/li\u003e\n\u003cli\u003eExternal chime speaker\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eHEIGH10 sold separately.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCloseout:\u003c\/strong\u003e This SMS listing is being sold from remaining closeout inventory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e PAC\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"PAC","offers":[{"title":"Default Title","offer_id":51699661275369,"sku":"SRK-RAM13H","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/pac-srk-ram13h-kit.jpg?v=1787263386"},{"product_id":"brand-closeout-oracle-lighting-bc1-bluetooth-colorshift-rgb-led-controller","title":"ORACLE Lighting BC1 Bluetooth ColorSHIFT RGB LED Controller — Brand Closeout","description":"\u003ch2\u003eORACLE Lighting BC1 Bluetooth ColorSHIFT RGB LED Controller\u003c\/h2\u003e\u003cp\u003eAlready have ORACLE ColorSHIFT RGB lighting but no clean way to control color, brightness and effects from one place? That is what the BC1 is for. It gives you Bluetooth app control over compatible ORACLE RGB lighting without trying to adapt a generic controller that may not match the wiring or load the system was designed around.\u003c\/p\u003e\u003cp\u003eThe BC1 has four waterproof lighting outputs and a 10-amp maximum current rating. Through the ORACLE ColorSHIFT app, you can turn the lighting on or off, choose colors, adjust brightness and animation speed, select patterns and strobe effects, and use music-reactive control. That makes it a practical controller for a vehicle where several compatible ColorSHIFT lighting pieces need to behave as one system.\u003c\/p\u003e\u003cp\u003eORACLE designed the controller for 12-volt ground-switched RGB lighting and rates the housing at IP67. The power wiring includes ring terminals and fuse protection, so the controller can be mounted inside or outside the cabin when the installation and wiring are done correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e the BC1 is an RGB controller, not an RGB+W or addressable\/color-chase controller. It also has a 10-amp total output limit, so the connected lighting load has to stay within the controller's rating. Use it with compatible ground-switched RGB products rather than assuming every four-wire lighting product uses the same control architecture.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: BC1\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 1720-504\u003c\/li\u003e\n\u003cli\u003eProduct type: Bluetooth ColorSHIFT RGB LED controller\u003c\/li\u003e\n\u003cli\u003eInput voltage: 12 V DC\u003c\/li\u003e\n\u003cli\u003eMaximum current output: 10 A\u003c\/li\u003e\n\u003cli\u003eLighting operation: ground-switched RGB\u003c\/li\u003e\n\u003cli\u003eLighting outputs: 4\u003c\/li\u003e\n\u003cli\u003eOutput connections: waterproof\u003c\/li\u003e\n\u003cli\u003eWeatherproof rating: IP67\u003c\/li\u003e\n\u003cli\u003eBluetooth smartphone app control\u003c\/li\u003e\n\u003cli\u003eApp functions: power, color, brightness, patterns, animation speed, strobe and music-reactive control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eManufacturer-Published Kit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 BC1 Bluetooth ColorSHIFT RGB LED controller\u003c\/li\u003e\n\u003cli\u003e4 accessory plugs with waterproof connections\u003c\/li\u003e\n\u003cli\u003e3 waterproof end caps for unused plugs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"ORACLE Lighting","offers":[{"title":"Default Title","offer_id":51699667960041,"sku":"1720-504","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/oracle-bc1-colorshift-controller-1720-504.jpg?v=1787263675"},{"product_id":"brand-closeout-ds18-v6hl-pro-6-channel-high-to-low-line-output-converter","title":"DS18 V6HL PRO 6-Channel High-to-Low Line Output Converter — Brand Closeout","description":"\u003ch2\u003eDS18 V6HL PRO 6-Channel High-to-Low Line Output Converter\u003c\/h2\u003e\u003cp\u003eKeeping the factory radio but need RCA signal for multiple aftermarket amplifier channels? That is where the V6HL PRO fits. Instead of trying to build a multi-channel system around a basic two-channel LOC, this gives you six speaker-level inputs and six RCA outputs so you can keep more of the factory channel layout intact.\u003c\/p\u003e\u003cp\u003eThe other reason to use it is factory-signal summing. Some OEM systems split the music across different speaker channels, so one pair of wires may not contain the full-range signal you need. The V6HL PRO has internal channel summing, letting selected factory inputs be combined into a usable preamp signal without adding another summing module. Signal-sensing inputs and the 12-volt trigger output also help when the factory radio does not provide a conventional aftermarket remote turn-on lead.\u003c\/p\u003e\u003cp\u003eDS18 publishes a maximum speaker-level input of 400 watts at 4 ohms and a maximum RCA output level of 9.5 Vrms. Level-matching controls give you room to set the output correctly for the amplifiers, and the included remote subwoofer level control gives the driver direct control over bass level after the system is installed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is a line-output converter, not a DSP. It can convert, level-match and sum factory signals, but it does not automatically correct factory EQ, time alignment, all-pass filters or volume-dependent processing. If the OEM system has heavy factory processing, a DSP or vehicle-specific integration solution may still be the better way to build the system.\u003c\/p\u003e\u003ch3\u003eManufacturer Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: V6HLPRO\u003c\/li\u003e\n\u003cli\u003e6 speaker-level input channels\u003c\/li\u003e\n\u003cli\u003e6 RCA output channels\u003c\/li\u003e\n\u003cli\u003eInternal channel summing\u003c\/li\u003e\n\u003cli\u003eSignal-sensing inputs\u003c\/li\u003e\n\u003cli\u003eLevel-matching controls\u003c\/li\u003e\n\u003cli\u003e12-volt trigger output \/ remote out\u003c\/li\u003e\n\u003cli\u003eRemote subwoofer level control included\u003c\/li\u003e\n\u003cli\u003eTiffany-style RCA jacks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximum speaker-level input: 400 watts at 4 ohms\u003c\/li\u003e\n\u003cli\u003eMaximum output level: 9.5 Vrms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 10 Hz–22 kHz\u003c\/li\u003e\n\u003cli\u003eOutput gain adjustment: ±12 dB\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion: 0.01%\u003c\/li\u003e\n\u003cli\u003eInput impedance: 20 kΩ\u003c\/li\u003e\n\u003cli\u003ePower supply: high-headroom PWM switching\u003c\/li\u003e\n\u003cli\u003ePower draw: 200 mA\u003c\/li\u003e\n\u003cli\u003eRecommended fuse: 1 A\u003c\/li\u003e\n\u003cli\u003eDimensions: 8 inches W × 6.1 inches D × 1.25 inches H\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":51699676840169,"sku":"V6HLPRO","price":71.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ds18-v6hlpro-actual-closeout-unit.jpg?v=1787263950"},{"product_id":"lucas-lighting-l1-series-led-headlight-bulbs-clearance","title":"Lucas Lighting L1 Series LED Headlight Bulbs — Pair — Brand Closeout","description":"\u003ch2\u003eLucas Lighting L1 Series LED Headlight Bulbs — Pair\u003c\/h2\u003e\u003cp\u003eStill running halogen bulbs and want a brighter white light without turning the install into a full headlight retrofit? The Lucas Lighting L1 Series is the entry-level direct-fit LED option in the line. The idea is simple: keep the factory-style bulb location, use the correct focus point for the housing and get more usable light without adding custom wiring.\u003c\/p\u003e\u003cp\u003eLucas designs the L1 Series for both reflector and projector-style housings, with plug-and-play connectors, active cooling and an IP65-or-better environmental rating. The exact bulb size still matters more than the series name, so choose the variant that matches the factory socket and beam configuration.\u003c\/p\u003e\u003ch3\u003eH7 Variant — L1-H7\u003c\/h3\u003e\u003cp\u003eChoose the H7 version when the vehicle uses an H7-family single-output bulb. Lucas cross-references this version to 64210 and common H7CB\/EB\/ST\/SU\/XV applications. Because H7 installations vary a lot in retainer style and rear-housing clearance, verify the factory socket, bulb retainer and dust-cap space before assuming a direct physical fit.\u003c\/p\u003e\u003cp\u003eThe H7 pair in this listing is earlier L1 inventory. The physical retail box for this revision is labeled \u003cstrong\u003e6000K\u003c\/strong\u003e, \u003cstrong\u003e60 watts maximum\u003c\/strong\u003e and \u003cstrong\u003e8000 lumens maximum\u003c\/strong\u003e. Those box specifications are the correct reference for this H7 pair rather than newer L1-series output numbers.\u003c\/p\u003e\u003ch3\u003e9007 \/ HB5 Variant — L1-9007\u003c\/h3\u003e\u003cp\u003eChoose the 9007 version when the vehicle calls for a 9007 \/ HB5 dual-output bulb. That matters because the 9007 handles two beam functions through one bulb position; it is not interchangeable with a single-output H7 just because both are sold in the same L1 family. Lucas specifically lists HB5 as the cross-reference for L1-9007.\u003c\/p\u003e\u003cp\u003eLucas publishes the L1-9007 with a large focus-point design, compatibility with reflector and projector housings, IP65-or-better protection and direct-fit plug-and-play connectors. The vehicle still needs the correct 9007\/HB5 socket and enough rear clearance for the LED cooling assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat these will not do:\u003c\/strong\u003e the L1 Series is not a universal headlight conversion and does not guarantee every vehicle will accept the bulb without an adapter, decoder or additional clearance work. Lucas also states that its front-firing LED replacement bulbs are intended for off-road and fog-light applications, so use and legality depend on the application.\u003c\/p\u003e\u003ch3\u003eManufacturer L1 Series Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003cli\u003eDirect-fit plug-and-play connectors\u003c\/li\u003e\n\u003cli\u003eLarge, controlled LED focus point\u003c\/li\u003e\n\u003cli\u003eCompatible with standard reflector and projector-style housings\u003c\/li\u003e\n\u003cli\u003eIP65 rated or better\u003c\/li\u003e\n\u003cli\u003eActive cooling design\u003c\/li\u003e\n\u003cli\u003eHigh-output bright-white LED light\u003c\/li\u003e\n\u003cli\u003eManufacturer-published service life: up to 10,000 hours under normal use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVariant Cross-References\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH7 \/ L1-H7:\u003c\/strong\u003e H7, 64210, H7CB, H7EB, H7ST, H7SU, H7XV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9007 \/ L1-9007:\u003c\/strong\u003e 9007, HB5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"Lucas Lighting","offers":[{"title":"H7","offer_id":51706239647977,"sku":"L1-H7","price":65.97,"currency_code":"USD","in_stock":true},{"title":"9007 \/ HB5","offer_id":51699679068393,"sku":"L1-9007","price":65.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/lucas-lighting-l1-9007-pair.jpg?v=1787264076"},{"product_id":"vision-vj-series-csp-led-headlight-conversion-kits-clearance","title":"Vision VJ Series CSP LED Headlight Conversion Kits — Pair — Brand Closeout","description":"\u003ch2\u003eVision \/ DS18 VJ Series CSP LED Headlight Conversion Kits — Pair\u003c\/h2\u003e\u003cp\u003eIf the vehicle already uses one of these bulb bases and you want a simple LED conversion without paying current-series pricing, these VJ kits are the remaining closeout option. The important part is choosing the \u003cstrong\u003eexact factory bulb type\u003c\/strong\u003e first. H1, H3, 880, 5202 and 9006 are single-beam applications in this group; 9004 is a dual high\/low-beam bulb and is not interchangeable with the others just because the kits share the same VJ family.\u003c\/p\u003e\u003cp\u003eThese remaining closeout kits use Seoul CSP Y19 LEDs, a compact blade-style head, built-in Super CANBUS support, a \u003cstrong\u003e6000–6500K\u003c\/strong\u003e color range, \u003cstrong\u003eDC 9–32 V\u003c\/strong\u003e operation, IP65 weather resistance, Aviation Aluminum 6063 heat dissipation and a \u003cstrong\u003e20 W ±10%\u003c\/strong\u003e input-power rating.\u003c\/p\u003e\u003cp\u003eDo not choose an LED conversion by bulb number alone. Confirm the vehicle's original bulb designation, connector, housing clearance, dust-cap clearance and beam pattern. Built-in CANBUS support can reduce compatibility issues, but some vehicles may still need an additional decoder to clear lamp-out or error messages.\u003c\/p\u003e\u003ch3\u003eH1 — VJH1\u003c\/h3\u003e\u003cp\u003eChoose VJH1 only for a housing that uses an H1 bulb. H1 is a single-beam format, so this kit replaces one lighting function at that position rather than combining high and low beam in the same bulb.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulb type: H1\u003c\/li\u003e\n\u003cli\u003eSKU: VJH1\u003c\/li\u003e\n\u003cli\u003eSingle-beam LED conversion\u003c\/li\u003e\n\u003cli\u003eLight source: Seoul CSP Y19\u003c\/li\u003e\n\u003cli\u003eCloseout package input power: 20 W ±10%\u003c\/li\u003e\n\u003cli\u003eColor temperature: 6000–6500K\u003c\/li\u003e\n\u003cli\u003eOperating voltage: DC 9–32 V\u003c\/li\u003e\n\u003cli\u003eHeat dissipation: Aviation Aluminum 6063\u003c\/li\u003e\n\u003cli\u003eIP65 weather resistance\u003c\/li\u003e\n\u003cli\u003eBuilt-in Super CANBUS\u003c\/li\u003e\n\u003cli\u003ePublished operating life: greater than 30,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eH3 — VJH3\u003c\/h3\u003e\u003cp\u003eUse VJH3 when the factory position takes an H3 bulb. This is another single-beam application and is commonly encountered in dedicated headlamp or auxiliary\/fog-lamp positions depending on the vehicle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulb type: H3\u003c\/li\u003e\n\u003cli\u003eSKU: VJH3\u003c\/li\u003e\n\u003cli\u003eSingle-beam LED conversion\u003c\/li\u003e\n\u003cli\u003eLight source: Seoul CSP Y19\u003c\/li\u003e\n\u003cli\u003eCloseout package input power: 20 W ±10%\u003c\/li\u003e\n\u003cli\u003eColor temperature: 6000–6500K\u003c\/li\u003e\n\u003cli\u003eOperating voltage: DC 9–32 V\u003c\/li\u003e\n\u003cli\u003eHeat dissipation: Aviation Aluminum 6063\u003c\/li\u003e\n\u003cli\u003eIP65 weather resistance\u003c\/li\u003e\n\u003cli\u003eBuilt-in Super CANBUS\u003c\/li\u003e\n\u003cli\u003ePublished operating life: greater than 30,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e880 — VJ880\u003c\/h3\u003e\u003cp\u003eChoose VJ880 only when the vehicle calls for an 880-base bulb. The advantage here is getting the compact VJ LED architecture in a dedicated 880 fitment instead of trying to adapt a different base.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulb type: 880\u003c\/li\u003e\n\u003cli\u003eSKU: VJ880\u003c\/li\u003e\n\u003cli\u003eSingle-beam LED conversion\u003c\/li\u003e\n\u003cli\u003eLight source: Seoul CSP Y19\u003c\/li\u003e\n\u003cli\u003eCloseout package input power: 20 W ±10%\u003c\/li\u003e\n\u003cli\u003eColor temperature: 6000–6500K\u003c\/li\u003e\n\u003cli\u003eOperating voltage: DC 9–32 V\u003c\/li\u003e\n\u003cli\u003eHeat dissipation: Aviation Aluminum 6063\u003c\/li\u003e\n\u003cli\u003eIP65 weather resistance\u003c\/li\u003e\n\u003cli\u003eBuilt-in Super CANBUS\u003c\/li\u003e\n\u003cli\u003ePublished operating life: greater than 30,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e5202 — VJ5202\u003c\/h3\u003e\u003cp\u003eThe VJ5202 is for vehicles using the 5202 bulb base. Because 5202 applications often have tight housing and connector packaging, verify physical clearance around the LED body and controller before assuming the nominal bulb match guarantees installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulb type: 5202\u003c\/li\u003e\n\u003cli\u003eSKU: VJ5202\u003c\/li\u003e\n\u003cli\u003eSingle-beam LED conversion\u003c\/li\u003e\n\u003cli\u003eLight source: Seoul CSP Y19\u003c\/li\u003e\n\u003cli\u003eCloseout package input power: 20 W ±10%\u003c\/li\u003e\n\u003cli\u003eColor temperature: 6000–6500K\u003c\/li\u003e\n\u003cli\u003eOperating voltage: DC 9–32 V\u003c\/li\u003e\n\u003cli\u003eHeat dissipation: Aviation Aluminum 6063\u003c\/li\u003e\n\u003cli\u003eIP65 weather resistance\u003c\/li\u003e\n\u003cli\u003eBuilt-in Super CANBUS\u003c\/li\u003e\n\u003cli\u003ePublished operating life: greater than 30,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e9004 High\/Low — VJ9004\u003c\/h3\u003e\u003cp\u003eThis is the one VJ option in this selector that handles \u003cstrong\u003eboth high and low beam in the same bulb\u003c\/strong\u003e. Choose it only for a true 9004 application. This closeout 9004 kit is rated at \u003cstrong\u003e20 W ±10%\u003c\/strong\u003e input power, matching the other remaining VJ kits in this listing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulb type: 9004\u003c\/li\u003e\n\u003cli\u003eSKU: VJ9004\u003c\/li\u003e\n\u003cli\u003eDual high\/low-beam LED conversion\u003c\/li\u003e\n\u003cli\u003eLight source: Seoul CSP Y19\u003c\/li\u003e\n\u003cli\u003eCloseout package input power: 20 W ±10%\u003c\/li\u003e\n\u003cli\u003eColor temperature: 6000–6500K\u003c\/li\u003e\n\u003cli\u003eOperating voltage: DC 9–32 V\u003c\/li\u003e\n\u003cli\u003eHeat dissipation: Aviation Aluminum 6063\u003c\/li\u003e\n\u003cli\u003eIP65 weather resistance\u003c\/li\u003e\n\u003cli\u003eBuilt-in Super CANBUS\u003c\/li\u003e\n\u003cli\u003ePublished operating life: greater than 30,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e9006 — VJ9006\u003c\/h3\u003e\u003cp\u003eChoose VJ9006 when the factory socket and housing use a 9006 bulb. It is a single-beam kit, so if the vehicle uses separate high- and low-beam bulbs, verify which position is actually 9006 before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBulb type: 9006\u003c\/li\u003e\n\u003cli\u003eSKU: VJ9006\u003c\/li\u003e\n\u003cli\u003eSingle-beam LED conversion\u003c\/li\u003e\n\u003cli\u003eLight source: Seoul CSP Y19\u003c\/li\u003e\n\u003cli\u003eCloseout package input power: 20 W ±10%\u003c\/li\u003e\n\u003cli\u003eColor temperature: 6000–6500K\u003c\/li\u003e\n\u003cli\u003eOperating voltage: DC 9–32 V\u003c\/li\u003e\n\u003cli\u003eHeat dissipation: Aviation Aluminum 6063\u003c\/li\u003e\n\u003cli\u003eIP65 weather resistance\u003c\/li\u003e\n\u003cli\u003eBuilt-in Super CANBUS\u003c\/li\u003e\n\u003cli\u003ePublished operating life: greater than 30,000 hours\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCloseout \u0026amp; Fitment Notes\u003c\/h3\u003e\u003cp\u003eThese are earlier VJ Series closeout kits; the specifications shown here apply to the remaining listed VJH1, VJH3, VJ880, VJ5202, VJ9004 and VJ9006 inventory. Confirm the selected bulb number against the vehicle before purchase. LED retrofit performance depends on the original lamp housing and optical design; a matching socket does not automatically guarantee a correct beam pattern or adequate rear clearance. Some vehicles can also require an additional CANBUS decoder even though the VJ controller has built-in CANBUS support.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"Vision","offers":[{"title":"H1","offer_id":51706238304489,"sku":"VJH1","price":29.99,"currency_code":"USD","in_stock":true},{"title":"H3","offer_id":51706238337257,"sku":"VJH3","price":29.99,"currency_code":"USD","in_stock":true},{"title":"880","offer_id":51706238370025,"sku":"VJ880","price":29.99,"currency_code":"USD","in_stock":true},{"title":"5202","offer_id":51699691585769,"sku":"VJ5202","price":29.99,"currency_code":"USD","in_stock":true},{"title":"9004","offer_id":51706238402793,"sku":"VJ9004","price":29.99,"currency_code":"USD","in_stock":true},{"title":"9006","offer_id":51706238435561,"sku":"VJ9006","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/vision-vjh1-led-closeout.jpg?v=1787264514"},{"product_id":"brand-closeout-heise-he-ptrgb-rgb-pigtail-adapter-for-accent-pods","title":"Heise HE-PTRGB RGB Pigtail Adapter for Accent Pods — Brand Closeout","description":"\u003ch2\u003eHeise HE-PTRGB RGB Pigtail Adapter\u003c\/h2\u003e\u003cp\u003eHave a Heise RGB accent pod with the waterproof connector, but the lighting system is using a standard 4-wire positive-anode RGB controller? The HE-PTRGB is the adapter that lets those two pieces work together without cutting the pod connector off and hardwiring around it.\u003c\/p\u003e\u003cp\u003eThat matters on a clean lighting install because the factory-style waterproof connection stays intact. Heise designed this pigtail for RGB accent pods such as the HE-TL1RGB and HE-ML1RGB, then breaks the connection out for use with a compatible 4-wire positive-anode RGB controller.\u003c\/p\u003e\u003cp\u003eHeise specifically lists controller families including the HE-RGBC-1, HE-RGBSAC-1, HE-WFRGBC-1 and HE-RFRGBC-1. For an install that already has compatible Heise pods but uses one of those external RGB-control setups, this is the small adapter that keeps you from modifying the pod wiring just to finish the job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is a wiring adapter, not an RGB controller, extension cable or power supply. It is designed around 4-wire positive-anode RGB control. If the lighting system uses RGBW, addressable\/color-chase LEDs or another wiring architecture, this is not automatically the correct adapter.\u003c\/p\u003e\u003ch3\u003eManufacturer Application\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: HE-PTRGB\u003c\/li\u003e\n\u003cli\u003eProduct type: RGB accent-pod pigtail adapter\u003c\/li\u003e\n\u003cli\u003eDesigned for compatible Heise RGB accent pods including HE-TL1RGB and HE-ML1RGB\u003c\/li\u003e\n\u003cli\u003eController type: compatible 4-wire positive-anode RGB controller\u003c\/li\u003e\n\u003cli\u003ePublished controller examples: HE-RGBC-1, HE-RGBSAC-1, HE-WFRGBC-1 and HE-RFRGBC-1\u003c\/li\u003e\n\u003cli\u003eAllows integration without cutting the pod's waterproof connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"Heise LED Lighting Systems","offers":[{"title":"Default Title","offer_id":51699704332521,"sku":"HE-PTRGB","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/heise-he-ptrgb-rgb-pigtail-actual-stock.jpg?v=1787265496"},{"product_id":"brand-closeout-xs-power-551-i-bar-side-top-terminal-adapter-kit","title":"XS Power 551 I-BAR Side and Top Terminal Adapter — Brand Closeout","description":"\u003ch2\u003eXS Power 551 I-BAR Side and Top Terminal Adaptor\u003c\/h2\u003e\u003cp\u003eUsing a compatible XS Power I-BAR battery in a GM-style side-terminal application? This is the adapter that lets the battery work with the vehicle's side-post connections without hacking up the factory battery cables, while still leaving options for additional top connections.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts to compatible XS Power I-BAR batteries\u003c\/li\u003e\n\u003cli\u003eProvides GM-style threaded side-post terminals\u003c\/li\u003e\n\u003cli\u003eSupports additional top-post or stud connections with compatible hardware\u003c\/li\u003e\n\u003cli\u003eDesigned to adapt compatible batteries to side-terminal GM applications without modifying the vehicle’s factory battery cables\u003c\/li\u003e\n\u003cli\u003eIncludes terminal covers and installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":51699705118953,"sku":"551","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/xs-power-551-official_51b1e35f-6bbd-4236-a2fe-4d490da20ca2.jpg?v=1787266019"},{"product_id":"brand-closeout-xs-power-553-i-bar-marine-side-and-top-terminal-adaptor","title":"XS Power 553 I-BAR Marine Side and Top Terminal Adapter — Brand Closeout","description":"\u003ch2\u003eXS Power 553 I-BAR Marine Side and Top Terminal Adaptor\u003c\/h2\u003e\u003cp\u003eNeed more than one clean connection point on a compatible XS Power battery? The 553 gives you side\/top capability plus dedicated 5\/16-inch and 3\/8-inch studs, which is a lot cleaner than stacking every accessory cable on one terminal and hoping it stays tight.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eI-BAR marine side-and-top terminal adaptor\u003c\/li\u003e\n\u003cli\u003e5\/16-inch stud connection\u003c\/li\u003e\n\u003cli\u003e3\/8-inch stud connection\u003c\/li\u003e\n\u003cli\u003eDesigned for compatible XS Power I-BAR battery applications\u003c\/li\u003e\n\u003cli\u003eProvides flexible battery connection options for marine, powersports, and custom 12-volt installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":51699710755049,"sku":"553","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/xs-power-553-official.jpg?v=1787265861"},{"product_id":"brand-closeout-xs-power-555-i-bar-multi-top-post-and-side-terminal-adaptor","title":"XS Power 555 I-BAR Multi Top-Post and Side-Terminal Adapter — Brand Closeout","description":"\u003ch2\u003eXS Power 555 I-BAR Multi Top Post and Side Terminal Adaptor\u003c\/h2\u003e\u003cp\u003eRunning a compatible XS Power battery in a GM side-terminal vehicle but still need extra top-side connection points for the rest of the 12-volt system? That is why the 555 exists. It keeps the factory-style side connection and adds multiple top posts instead of turning the battery terminal into a stack of improvised hardware.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts to compatible XS Power I-BAR batteries\u003c\/li\u003e\n\u003cli\u003eProvides GM-style threaded side-post terminals\u003c\/li\u003e\n\u003cli\u003eIncludes four top-post terminals for additional positive and negative connections\u003c\/li\u003e\n\u003cli\u003eAllows factory-style GM battery cable connection without cutting the vehicle harness\u003c\/li\u003e\n\u003cli\u003eIncludes positive and negative adaptor rails plus mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":51699710820585,"sku":"555","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/xs-power-555-official.jpg?v=1787265869"},{"product_id":"brand-closeout-xs-power-556-i-bar-multi-top-post-terminal-adaptor-top-only","title":"XS Power 556 I-BAR Multi Top-Post Terminal Adapter — Top Only — Brand Closeout","description":"\u003ch2\u003eXS Power 556 I-BAR Multi Top Post Terminal Adaptor — Top Only\u003c\/h2\u003e\u003cp\u003eNeed more top-side connection points on a compatible XS Power I-BAR battery but have no reason to add GM side posts? Use the top-only 556 instead of buying terminal hardware you do not need. It is a simple power-distribution fix for a battery that has to feed more than one circuit cleanly.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eI-BAR multi top-post terminal adaptor\u003c\/li\u003e\n\u003cli\u003eTop-terminal configuration only\u003c\/li\u003e\n\u003cli\u003eDesigned for compatible XS Power I-BAR battery applications\u003c\/li\u003e\n\u003cli\u003eProvides additional battery connection points for custom 12-volt power distribution\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":51699711279337,"sku":"556","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/xs-power-556-official.jpg?v=1787265877"},{"product_id":"brand-closeout-xs-power-575-xp1000-brass-post-adaptors-and-bolts-m10","title":"XS Power 575 XP1000 Brass Post Adapters and M10 Bolts — Brand Closeout","description":"\u003ch2\u003eXS Power 575 XP1000 Brass Post Adaptors and Bolts\u003c\/h2\u003e\u003cp\u003eHave a compatible XP1000 with M10 terminal points but need conventional battery-post connections? That is all this kit is here to solve. The 575 turns those M10 points into brass post connections without making the battery wiring into a custom science project.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for compatible XS Power XP1000 applications\u003c\/li\u003e\n\u003cli\u003eBrass battery post adaptors\u003c\/li\u003e\n\u003cli\u003eM10 thread configuration\u003c\/li\u003e\n\u003cli\u003eIncludes matching M10 mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":51699711344873,"sku":"575","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/xs-power-575-official.jpg?v=1787265884"},{"product_id":"brand-closeout-xs-power-588-5-16-and-3-8-stud-adaptor-kit","title":"XS Power 588 5\/16 \u0026 3\/8-Inch Stud Adapter Kit — Brand Closeout","description":"\u003ch2\u003eXS Power 588 Stud Adaptor Kit\u003c\/h2\u003e\u003cp\u003eNeed proper threaded studs for ring-terminal power or ground connections instead of trying to stack hardware on a battery terminal? The 588 gives you two 5\/16-inch and two 3\/8-inch stud adapters for compatible XS Power applications. Small part, but it cleans up the connection the right way.\u003c\/p\u003e\u003ch3\u003eKit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo 5\/16-inch stud adaptors\u003c\/li\u003e\n\u003cli\u003eTwo 3\/8-inch stud adaptors\u003c\/li\u003e\n\u003cli\u003eDesigned for compatible XS Power terminal applications\u003c\/li\u003e\n\u003cli\u003eProvides secure threaded connection points for ring-terminal power and ground wiring\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":51699711377641,"sku":"588","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/xs-power-588-official.jpg?v=1787265890"},{"product_id":"brand-closeout-xs-power-bc-rtst-insulated-sae-battery-clamps","title":"XS Power BC-RTST Insulated SAE Battery Clamps — Brand Closeout","description":"\u003ch2\u003eXS Power BC-RTST Insulated SAE Battery Clamps\u003c\/h2\u003e\u003cp\u003eNeed a removable SAE battery-post connection for a cable that already ends in ring terminals? These clamps give you a cleaner serviceable connection instead of changing the whole cable end. Useful for charging, service work and compatible custom 12-volt setups.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSAE automotive battery clamp fitment\u003c\/li\u003e\n\u003cli\u003eRing-terminal cable connection\u003c\/li\u003e\n\u003cli\u003eInsulated clamp construction\u003c\/li\u003e\n\u003cli\u003eSuitable for temporary, service, charging, and custom 12-volt battery connections where SAE posts are used\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":51699711541481,"sku":"BC-RTST","price":8.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/xs-power-bc-rtst-official.jpg?v=1787266006"},{"product_id":"brand-closeout-echomaster-bsckitjljt-jeep-jl-jt-blind-spot-side-view-dual-camera-kit","title":"EchoMaster BSCKITJLJT — Jeep Wrangler JL \/ Gladiator JT Blind-Spot Side-View Dual Camera Kit — Closeout","description":"\u003ch2\u003eEchoMaster BSCKITJLJT Jeep JL\/JT Blind-Spot Side-View Dual Camera Kit\u003c\/h2\u003e\u003cp\u003eTake the doors off a Wrangler JL or Gladiator JT and the factory mirrors go with them. That is exactly the problem this EchoMaster kit solves. It adds a left and right side-view camera to the Jeep so you can keep a useful view down both sides of the vehicle with the doors on or off.\u003c\/p\u003e\u003cp\u003eThe cameras mount without permanent vehicle modifications, and the foam-backed brackets help protect the factory paint. Camera angle is adjustable, so the view can be aimed for the Jeep and the way the monitor is being used instead of being stuck with one fixed camera position. The rubberized camera coating is also better suited to an exposed Jeep application than a basic universal camera.\u003c\/p\u003e\u003cp\u003eIf the Jeep is running a HEIGH10, this kit is made for direct connection. It can also be used with a compatible monitor that accepts composite NTSC video, but EchoMaster specifies the VS41 interface where applicable, and that interface is not included. The kit includes both cameras, brackets, 20-foot extension wiring, power\/video adapters and the adjustment tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is a camera-based side-view system, not a radar blind-spot detection system. It does not create automatic blind-spot warning lights or alerts by itself, and it does not include a display. The radio or monitor side of the system still has to support the camera inputs and switching needed for the installation.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e BSCKITJLJT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Dual blind-spot \/ side-view camera kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle application:\u003c\/strong\u003e 2018+ Jeep Wrangler JL and 2020+ Jeep Gladiator JT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoor configuration:\u003c\/strong\u003e Designed for use with the Jeep doors on or off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera angle:\u003c\/strong\u003e Fully adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera connection:\u003c\/strong\u003e Standard 5-pin EchoMaster connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension harness length:\u003c\/strong\u003e 20 feet per camera\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera construction:\u003c\/strong\u003e Rugged rubberized coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Reversible installation with no permanent vehicle modification; foam-backed mounts help protect factory paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay compatibility:\u003c\/strong\u003e Direct HEIGH10 connection or compatible composite NTSC monitor when the required interface is used\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRequired interface for applicable composite-monitor installations:\u003c\/strong\u003e VS41, not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlind-spot \/ side-view cameras: 2\u003c\/li\u003e\n\u003cli\u003eMounting brackets: 2\u003c\/li\u003e\n\u003cli\u003eCamera extension cables: 2\u003c\/li\u003e\n\u003cli\u003eCamera power\/video adapters: 2\u003c\/li\u003e\n\u003cli\u003eU-shaped camera-angle adjustment tool\u003c\/li\u003e\n\u003cli\u003eWarranty card\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e EchoMaster\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"EchoMaster","offers":[{"title":"BSCKITJLJT — Jeep JL\/JT Blind-Spot Dual Camera Kit","offer_id":51699714785513,"sku":"BSCKITJLJT","price":179.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/echomaster-bsckitjljt-official.jpg?v=1787266444"},{"product_id":"brand-closeout-lucas-lighting-l-1157sb-switchback-led-bulb-pair","title":"Lucas Lighting L-1157SB Switchback LED Bulb Pair — Brand Closeout","description":"\u003ch2\u003eLucas Lighting L-1157SB Switchback LED Bulb Pair\u003c\/h2\u003e\u003cp\u003eWant the front marker or daytime-running light to stay white, but still have the same bulb flash amber when you hit the turn signal? That is the job of the L-1157SB. Instead of adding a separate white accent light next to the turn signal, the switchback bulb handles both functions through the compatible 1157-style socket.\u003c\/p\u003e\u003cp\u003eIn normal marker\/DRL operation, the bulb illuminates white. When the turn signal is activated, it switches over to amber flashing so the signal function stays visually correct. Lucas Lighting builds the L-1157SB as a 16-LED CANBUS high-output bulb pair, which makes it a cleaner upgrade when the vehicle already uses the front 1157-family socket for both running-light and turn-signal duties.\u003c\/p\u003e\u003cp\u003eThis makes the most sense when the factory bulb location and wiring already support that dual-function behavior. Lucas lists the L-1157SB as a replacement for a range of common 1157-family numbers, so the base style may cross over to several factory bulb references without changing the socket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e a compatible bulb base does not guarantee every vehicle will operate a switchback LED without a warning message or hyperflash. CANBUS-compatible electronics help with modern lighting systems, but vehicle-specific bulb monitoring and flasher logic can still vary. Verify the factory bulb type and the vehicle's LED compatibility before treating this as a universal plug-in fix.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: L-1157SB\u003c\/li\u003e\n\u003cli\u003eProduct type: switchback LED bulb pair\u003c\/li\u003e\n\u003cli\u003eBase family: 1157 dual-function\u003c\/li\u003e\n\u003cli\u003eLED count: 16 LEDs per bulb design\u003c\/li\u003e\n\u003cli\u003eLighting colors: white \/ amber\u003c\/li\u003e\n\u003cli\u003eNormal marker \/ DRL output: white\u003c\/li\u003e\n\u003cli\u003eTurn-signal output: flashing amber\u003c\/li\u003e\n\u003cli\u003eCANBUS-compatible design\u003c\/li\u003e\n\u003cli\u003eQuantity: one pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePublished Bulb Cross-References\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1157\u003c\/li\u003e\n\u003cli\u003e94\u003c\/li\u003e\n\u003cli\u003e1016\u003c\/li\u003e\n\u003cli\u003e1034 \/ 1034LL\u003c\/li\u003e\n\u003cli\u003e1142\u003c\/li\u003e\n\u003cli\u003e1157ALL \/ 1157LL \/ 1157ST\u003c\/li\u003e\n\u003cli\u003e1178A\u003c\/li\u003e\n\u003cli\u003e1196\u003c\/li\u003e\n\u003cli\u003e2057 \/ 2057A \/ 2057ALL \/ 2057LL \/ 2057ST\u003c\/li\u003e\n\u003cli\u003e2357A \/ 2357ALL \/ 2357LL \/ 2357NA\u003c\/li\u003e\n\u003cli\u003e2397 \/ 2397LL\u003c\/li\u003e\n\u003cli\u003e3496 \/ 3496LL\u003c\/li\u003e\n\u003cli\u003e7528 \/ 7528L \/ 7528LL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"Lucas Lighting","offers":[{"title":"Default Title","offer_id":51699730579689,"sku":"L-1157SB","price":27.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/lucas-lighting-l-1157sb-closeout.jpg?v=1787267177"},{"product_id":"brand-closeout-lucas-lighting-l-t10d-t10-194-canbus-led-bulb-pair","title":"Lucas Lighting L-T10D T10\/194 CANBUS LED Bulb Pair — Brand Closeout","description":"\u003ch2\u003eLucas Lighting L-T10D T10\/194 Digital Advanced CANBUS LED Bulb Pair\u003c\/h2\u003e\u003cp\u003eHave a T10\/194 bulb location where a basic LED works electrically but still throws a bulb warning, flickers or just does not behave correctly with the vehicle's lighting system? The L-T10D is Lucas Lighting's more CANBUS-focused version of the T10 replacement, built for vehicles that are pickier about what is plugged into the factory circuit.\u003c\/p\u003e\u003cp\u003eThe T10\/194 size shows up in a lot of places—map lights, license-plate lights, marker lights, parking lights and other small interior or exterior locations depending on the vehicle. Lucas builds the L-T10D as a white high-output LED pair with an integrated fuse and what it calls its Digital Advanced CANBUS design. Lucas also states that the white-light output is more than five times higher than the halogen bulbs this series is intended to replace.\u003c\/p\u003e\u003cp\u003eThis makes sense when you want a brighter, whiter replacement but do not want to start with the cheapest generic T10 and then chase electrical issues afterward. The bulb still needs to match the actual socket and application, but the CANBUS-oriented electronics give you a better starting point on vehicles that monitor the lighting circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e CANBUS-compatible does not mean guaranteed error-free operation in every year, make and model. Some vehicles use unusually sensitive bulb monitoring or PWM control and may still need additional vehicle-specific correction. Verify the factory bulb number and application before ordering instead of assuming every small wedge-base lamp is the same.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: L-T10D\u003c\/li\u003e\n\u003cli\u003eProduct type: Digital Advanced CANBUS LED bulb pair\u003c\/li\u003e\n\u003cli\u003eBase family: T10 \/ 194\u003c\/li\u003e\n\u003cli\u003eLight color: white\u003c\/li\u003e\n\u003cli\u003eIntegrated fuse\u003c\/li\u003e\n\u003cli\u003eDesigned for interior and exterior T10-family applications\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated output: more than 5× higher than halogen bulbs\u003c\/li\u003e\n\u003cli\u003eQuantity: one pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePublished Bulb Cross-References\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e158\u003c\/li\u003e\n\u003cli\u003e161\u003c\/li\u003e\n\u003cli\u003e168\u003c\/li\u003e\n\u003cli\u003e193\u003c\/li\u003e\n\u003cli\u003e194\u003c\/li\u003e\n\u003cli\u003e501\u003c\/li\u003e\n\u003cli\u003e590\u003c\/li\u003e\n\u003cli\u003e658\u003c\/li\u003e\n\u003cli\u003e901\u003c\/li\u003e\n\u003cli\u003e904\u003c\/li\u003e\n\u003cli\u003e906\u003c\/li\u003e\n\u003cli\u003e912\u003c\/li\u003e\n\u003cli\u003e915\u003c\/li\u003e\n\u003cli\u003e916\u003c\/li\u003e\n\u003cli\u003e917\u003c\/li\u003e\n\u003cli\u003e918\u003c\/li\u003e\n\u003cli\u003e920\u003c\/li\u003e\n\u003cli\u003e921\u003c\/li\u003e\n\u003cli\u003e922\u003c\/li\u003e\n\u003cli\u003e923\u003c\/li\u003e\n\u003cli\u003e3652\u003c\/li\u003e\n\u003cli\u003eW3W\u003c\/li\u003e\n\u003cli\u003eW5W\u003c\/li\u003e\n\u003cli\u003eW16W\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"Lucas Lighting","offers":[{"title":"Default Title","offer_id":51699734773993,"sku":"L-T10D","price":16.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/lucas-lighting-l-t10d-closeout.jpg?v=1787267307"},{"product_id":"brand-closeout-ds18-fhdb3anl-150a-anl-distribution-fuse-holder","title":"DS18 FHDB3ANL-150A ANL Distribution Fuse Holder — Brand Closeout","description":"\u003ch2\u003eDS18 FHDB3ANL-150A ANL Distribution Fuse Holder\u003c\/h2\u003e\u003cp\u003eRunning one main power cable into an amp rack and need to split it into three separately fused circuits? That is exactly what the FHDB3ANL-150A is for. Instead of using one distribution block and then adding three separate fuse holders, this puts the split and the fuse protection in one piece.\u003c\/p\u003e\u003cp\u003eDS18 gives you one main input that accepts 1\/0- to 4-gauge cable and three outputs that accept 4- to 8-gauge cable. That layout makes sense when one larger feed comes from the battery and the rack needs separate protected feeds for multiple amplifiers or other high-current equipment. The nickel-plated contacts and heat-resistant base and cover are there to keep the connections solid and the fuse area protected.\u003c\/p\u003e\u003cp\u003eThree 150-amp ANL fuses are included, but the fuse value still has to match the wire and equipment on each output. If one branch uses smaller cable or feeds equipment that requires a lower fuse value, change that branch to the correct ANL fuse instead of assuming 150 amps is right just because that is what comes in the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this does not replace the main fuse at the battery, and it is not the right block if the system needs more than three fused outputs or cable larger than the published input\/output range. The branch fuses protect the downstream circuits; the main power cable still needs proper protection near the source.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: FHDB3ANL-150A\u003c\/li\u003e\n\u003cli\u003eType: ANL distribution fuse holder\u003c\/li\u003e\n\u003cli\u003eMain input: 1 × 1\/0- to 4-gauge\u003c\/li\u003e\n\u003cli\u003eOutputs: 3 × 4- to 8-gauge\u003c\/li\u003e\n\u003cli\u003eIncluded fuses: 3 × 150-amp ANL\u003c\/li\u003e\n\u003cli\u003eContacts: nickel plated\u003c\/li\u003e\n\u003cli\u003eProtective cover: smoke color\u003c\/li\u003e\n\u003cli\u003eBase and cover: heat resistant\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":51699743424745,"sku":"FHDB3ANL-150A","price":18.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ds18-fhdb3anl-150a-closeout.jpg?v=1787267610"},{"product_id":"brand-closeout-diamond-audio-dargb8a-rgb-led-app-remote-controller","title":"Diamond Audio DARGB8A RGB LED App Remote Controller — Brand Closeout","description":"\u003ch2\u003eDiamond Audio DARGB8A RGB LED App Remote Controller\u003c\/h2\u003e\u003cp\u003eHave multiple Diamond Audio RGB speakers or marine subs and want one controller handling the lighting instead of separate remotes and loose wiring? That is what the DARGB8A is for. It gives you eight RGB outputs and app-based control, so one controller can manage the lighting across a larger motorcycle, marine, UTV or custom-audio build.\u003c\/p\u003e\u003cp\u003eThe big advantage is phone control. Diamond Audio’s current support links direct \u003cstrong\u003eiOS users to the AF LED app\u003c\/strong\u003e and \u003cstrong\u003eAndroid users to the EZ LED app\u003c\/strong\u003e. From the compatible app you can change color, speed, strobe patterns and other lighting modes without adding another handheld remote to the vehicle.\u003c\/p\u003e\u003cp\u003eThe eight-output layout matters when the system has several illuminated speakers. Instead of repeatedly splitting one small controller, the DARGB8A provides up to eight lighting outputs for compatible Diamond Audio RGB loads. Diamond specifically publishes compatibility with HXM525, HXM65, HXM8, MS104FA and MS104SL lighting applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this controller handles compatible RGB lighting only. It does not control amplifier gain, speaker volume, DSP settings or audio playback, and it is not a universal controller for every addressable or digital LED architecture. Match the lighting wiring and controller type before connecting non-Diamond products.\u003c\/p\u003e\u003ch3\u003eManufacturer Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e DARGB8A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e RGB LED app controller with remote trigger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB outputs:\u003c\/strong\u003e Up to 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eiOS app:\u003c\/strong\u003e AF LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAndroid app:\u003c\/strong\u003e EZ LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting controls:\u003c\/strong\u003e Color, speed, strobe and additional lighting modes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote-trigger capability:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for:\u003c\/strong\u003e Compatible Diamond Audio HXM and MS-series RGB lighting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePublished Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiamond Audio HXM525\u003c\/li\u003e\n\u003cli\u003eDiamond Audio HXM65\u003c\/li\u003e\n\u003cli\u003eDiamond Audio HXM8\u003c\/li\u003e\n\u003cli\u003eDiamond Audio MS104FA\u003c\/li\u003e\n\u003cli\u003eDiamond Audio MS104SL\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"Diamond Audio","offers":[{"title":"Default Title","offer_id":51699744375017,"sku":"DARGB8A","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/diamond-audio-dargb8a-closeout.jpg?v=1787267786"},{"product_id":"brand-closeout-ds18-lbc6vam-rgb-volt-current-meter-badge","title":"DS18 LBC6VAM RGB Volt \u0026 Current Meter Badge — Brand Closeout","description":"\u003ch2\u003eDS18 LBC6VAM RGB Volt \u0026amp; Current Meter Badge\u003c\/h2\u003e\u003cp\u003eWant to see what the electrical system is doing without adding a plain industrial-looking meter to a finished build? That is where the LBC6VAM fits. It combines a voltmeter, current meter and RGB-lit DS18 badge in one panel-mount piece, so you can monitor the system and still make the install look intentional.\u003c\/p\u003e\u003cp\u003eThis makes the most sense on a build where voltage drop and current draw actually matter—large amplifier systems, secondary-battery setups, demo vehicles or custom amp racks where the electrical side is part of the display. DS18 publishes a 0–30-volt measurement range and a 0–999-amp current range, using a 0.75 mV \/ 1000 A current divider for the amperage measurement.\u003c\/p\u003e\u003cp\u003eThe housing is chrome plated and listed by DS18 as waterproof, while the logo uses a 12-volt RGB input. That gives you the electrical information on the display and the lighting effect around it without needing a separate badge and meter occupying two different spots in the panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a clamp-on ammeter and it is not a plug-in voltmeter. Current measurement requires the proper current-divider\/shunt setup and wiring, and the RGB section still needs a compatible RGB control method if you want color control. Plan the meter wiring and panel location before cutting the mounting hole.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: LBC6VAM\u003c\/li\u003e\n\u003cli\u003eProduct type: RGB badge with volt\/current meter\u003c\/li\u003e\n\u003cli\u003eVoltage measurement range: 0–30 V\u003c\/li\u003e\n\u003cli\u003eCurrent measurement range: 0–999 A\u003c\/li\u003e\n\u003cli\u003eCurrent divider: 0.75 mV \/ 1000 A\u003c\/li\u003e\n\u003cli\u003eRGB input voltage: 12 V DC\u003c\/li\u003e\n\u003cli\u003eHousing: chrome plated\u003c\/li\u003e\n\u003cli\u003eMeter construction: waterproof\u003c\/li\u003e\n\u003cli\u003eOverall diameter: 89.9 mm \/ 3.54 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":51699751616745,"sku":"LBC6VAM","price":29.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ds18-lbc6vam-closeout.jpg?v=1787268092"},{"product_id":"brand-closeout-cerwin-vega-rpmrgblc-rgb-remote-lighting-controller","title":"Cerwin Vega RPMRGBLC RGB Remote Lighting Controller — Brand Closeout","description":"\u003ch2\u003eCerwin Vega RPMRGBLC RGB Remote Lighting Controller\u003c\/h2\u003e\u003cp\u003eHave Cerwin Vega speakers with RGB lighting but no way to actually change the color or effects? That is the job of the RPMRGBLC. It gives you a simple RF remote to control the lighting side of compatible Cerwin Vega RGB-equipped speakers, so you can change colors, dim the LEDs and adjust the effects without adding a phone app or a more complicated lighting controller.\u003c\/p\u003e\u003cp\u003eThis is the straightforward controller in Cerwin Vega's RGB lineup. You can select colors, adjust brightness, change effect speed and control fade or strobe functions from the included remote. The circuit board is conformal coated for added resistance to moisture, dust and heat, which is why it makes sense in marine, powersports and other exposed audio installations.\u003c\/p\u003e\u003cp\u003eFor a system that already has compatible standard RGB speaker lighting, this is a clean way to finish the lighting setup. It is especially useful when you just want the speakers to light up and be easy to control without paying for the larger RPMRGB8A app-controlled controller and its additional outputs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e the RPMRGBLC does not have smartphone-app control. It is also not made for addressable digital RGB-IC lighting, and it does not control audio volume, amplifier settings or speaker output. Cerwin Vega designs it around compatible 12-volt common-anode RGB lighting, so total LED load and wiring still need to stay within the controller's supported limits.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e RPMRGBLC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e RGB LED lighting controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e RF wireless remote\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary compatibility:\u003c\/strong\u003e Compatible Cerwin Vega RGB speaker lighting, including supported RPM Series applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting functions:\u003c\/strong\u003e Color selection, brightness\/dimming, speed adjustment, fade and strobe effects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Conformal-coated circuit board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote control:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApp control:\u003c\/strong\u003e Not supported on RPMRGBLC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting architecture:\u003c\/strong\u003e Standard 12-volt common-anode RGB; not addressable digital RGB-IC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Cerwin Vega\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":51699751780585,"sku":"RPMRGBLC","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/cerwin-vega-rpmrgblc-closeout.jpg?v=1787268107"},{"product_id":"brand-closeout-ds18-fh4w-4-way-anl-fuse-holder","title":"DS18 FH4W 4-Way ANL Fuse Holder — Brand Closeout","description":"\u003ch2\u003eDS18 FH4W 4-Way ANL Fuse Holder\u003c\/h2\u003e\u003cp\u003eBuilding an amp rack with several high-current circuits and tired of mounting separate ANL fuse holders all over the panel? That is where the FH4W makes sense. It gives you four ANL fuse positions in one assembly, so the protection for multiple circuits can stay together and the power section of the install is easier to service.\u003c\/p\u003e\u003cp\u003eThis is the kind of part we would use when the system layout is already planned and we want the fuse section organized before the wiring is finished. The flame-retardant base, clear acrylic cover and stainless hardware give the holder a clean finished look while still keeping the fuse area visible.\u003c\/p\u003e\u003cp\u003eThere is one important part to understand before ordering it: DS18 lists the FH4W as the holder assembly only. The ANL fuses and the cable terminals are not included, so those need to be selected around the wire size and the actual current requirement of each circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a pre-fused distribution block and it does not choose the correct fuse size for the system. Each circuit still needs an ANL fuse sized for the downstream cable and equipment, and the main feed still needs proper source-side protection where required.\u003c\/p\u003e\u003ch3\u003eManufacturer Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: FH4W\u003c\/li\u003e\n\u003cli\u003eProduct type: 4-way ANL fuse holder\u003c\/li\u003e\n\u003cli\u003eFuse positions: 4\u003c\/li\u003e\n\u003cli\u003eFlame-retardant plastic base\u003c\/li\u003e\n\u003cli\u003eTransparent acrylic cover\u003c\/li\u003e\n\u003cli\u003eStainless-steel hardware\u003c\/li\u003e\n\u003cli\u003e12-volt red LED power indicator\u003c\/li\u003e\n\u003cli\u003eANL fuses not included\u003c\/li\u003e\n\u003cli\u003eCable terminals not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":51699751846121,"sku":"FH4W","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ds18-fh4w-closeout.jpg?v=1787268118"},{"product_id":"brand-closeout-heise-he-d2cpro-pro-series-d2s-d2r-hid-to-led-bulb-set","title":"Heise HE-D2CPRO Pro Series D2S\/D2R HID-to-LED Bulb Set — Brand Closeout","description":"\u003ch2\u003eHeise HE-D2CPRO Pro Series D2S\/D2R HID-to-LED Bulb Set\u003c\/h2\u003e\u003cp\u003eHave a D2S or D2R HID setup and want the instant start-up and output of LED for an off-road application without replacing the entire headlight housing? That is what the HE-D2CPRO is built for. It replaces the HID bulb assembly and connects at the input side of the factory ballast, keeping the conversion focused on the light source instead of turning it into a full housing retrofit.\u003c\/p\u003e\u003cp\u003eHeise rates the pair at 16,000 lumens and 70 watts per set. The LED position and rotatable collar are designed so the bulbs can be keyed and aimed for both projector “S” and reflector “R” housings, while the 2 mm solid-copper thermodynamic core and high-speed fan handle heat management.\u003c\/p\u003e\u003cp\u003eThe install also includes the details that matter on a modern vehicle: 12–24-volt operation, reverse-polarity protection, an EMI filter to reduce radio interference and a side-cable connection to keep the assembly slimmer behind the housing. Heise publishes a 6500K color temperature and an IP65 rating for the Pro Series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a road-legal headlight conversion. Heise specifically labels the HE-D2CPRO for off-road use only and says it is not for use on public roads. It is also only for compatible D2S\/D2R applications; the vehicle, ballast connection and available housing clearance still need to match before installation.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: HE-D2CPRO\u003c\/li\u003e\n\u003cli\u003eApplication: D2S and D2R HID-to-LED conversion\u003c\/li\u003e\n\u003cli\u003eQuantity: one pair\u003c\/li\u003e\n\u003cli\u003eLight output: 16,000 lumens per set\u003c\/li\u003e\n\u003cli\u003ePower consumption: 70 watts per set\u003c\/li\u003e\n\u003cli\u003eColor temperature: 6500K\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 12–24 V DC\u003c\/li\u003e\n\u003cli\u003eEnvironmental rating: IP65\u003c\/li\u003e\n\u003cli\u003e2 mm solid-copper thermodynamic core\u003c\/li\u003e\n\u003cli\u003eAll-metal construction\u003c\/li\u003e\n\u003cli\u003eRotatable collar for beam-pattern adjustment\u003c\/li\u003e\n\u003cli\u003eIC thermal controller with high-speed smart fan\u003c\/li\u003e\n\u003cli\u003eBuilt-in reverse-polarity protection\u003c\/li\u003e\n\u003cli\u003eBuilt-in EMI filter\u003c\/li\u003e\n\u003cli\u003eSide-cable connection\u003c\/li\u003e\n\u003cli\u003eDesigned for projector “S” and reflector “R” housings\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 3 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eManufacturer Use Restriction:\u003c\/strong\u003e Heise specifies this product for off-road use only, not for use on public roads. Heise also recommends keeping the original HID bulbs so they can be reinstalled for public-road use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"Heise LED Lighting Systems","offers":[{"title":"Default Title","offer_id":51699754795241,"sku":"HE-D2CPRO","price":81.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/heise-he-d2cpro-closeout.jpg?v=1787268130"},{"product_id":"brand-closeout-xs-power-big3-rd-1-0-awg-big-3-upgrade-kit","title":"XS Power BIG3-RD 1\/0 AWG Big 3 Upgrade Kit — Brand Closeout","description":"\u003ch2\u003eXS Power BIG3-RD 1\/0 AWG Big 3 Upgrade Kit\u003c\/h2\u003e\u003cp\u003eVoltage dropping because the factory charging-system cables are the bottleneck? A Big 3 upgrade is where we start cleaning up the main current paths: alternator positive to battery positive, battery negative to chassis, and engine block to chassis. This kit gives you the 1\/0 AWG cable and hardware for those three runs. It improves the wiring path; it does not magically create alternator or battery capacity that is not there.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eXP FLEX 1\/0 AWG cable\u003c\/li\u003e\n\u003cli\u003e250-amp rated Big 3 upgrade kit\u003c\/li\u003e\n\u003cli\u003eOne 6-foot red 1\/0 AWG power cable\u003c\/li\u003e\n\u003cli\u003eTwo 4-foot 1\/0 AWG ground cables\u003c\/li\u003e\n\u003cli\u003ePre-terminated ring connections\u003c\/li\u003e\n\u003cli\u003eIncludes additional crimp terminals, heat shrink, wire clamps, zip ties, and mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBig 3 circuits:\u003c\/strong\u003e alternator positive to battery positive, battery negative to chassis, and engine block to chassis.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":51699754893545,"sku":"BIG3-RD","price":31.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/xs-power-big-3-rd-closeout.jpg?v=1787268141"},{"product_id":"brand-closeout-db-link-comp4-anl-4-gauge-competition-amplifier-wiring-kit","title":"DB Link COMP4-ANL 4-Gauge Competition Amplifier Wiring Kit — Brand Closeout","description":"\u003ch2\u003eDB Link COMP4-ANL Competition Series 4-Gauge Amplifier Wiring Kit\u003c\/h2\u003e\u003cp\u003eAdding an amplifier and need the power wire, ground, signal cable, remote wire, speaker wire and fuse protection in one kit? That is what the COMP4-ANL is built for. It gives you the basic wiring package for a 4-gauge amplifier installation without having to piece every part together separately.\u003c\/p\u003e\u003cp\u003eThe important thing to know before choosing it is the main power cable: DB Link uses 4-gauge CCA cable in this kit, not OFC. That does not automatically make it the wrong kit, but it does mean the amplifier and electrical demand need to match the wiring. For a moderate-power build where the current draw stays within what the cable and included 100-amp ANL protection are intended to handle, this can be a practical complete-kit option. For a high-current monoblock or a system where voltage drop needs to be kept as low as possible, we would step up to a properly sized OFC kit instead.\u003c\/p\u003e\u003cp\u003eDB Link includes a 17-foot 4-gauge power cable, 3-foot 4-gauge ground cable, 17-foot SX Series RCA cable, 17-foot remote wire and 20 feet of 16-gauge speaker wire. The ANL fuse holder and 100-amp fuse take care of the main power protection, while the split loom, ring terminals and small installation pieces help finish the run cleanly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a universal answer for every amplifier. The included cable is CCA, the fuse is 100 amps and the kit is built around a 4-gauge power run. If the amplifier manufacturer calls for larger wire, more current capacity or OFC specifically, use the wiring the amplifier actually requires instead of choosing the kit by price alone.\u003c\/p\u003e\u003ch3\u003eManufacturer Kit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e17 ft \/ 5.18 m 4-gauge blue Super Flex-Soft Touch CCA power cable\u003c\/li\u003e\n\u003cli\u003e3 ft \/ 0.91 m 4-gauge silver Super Flex-Soft Touch CCA ground cable\u003c\/li\u003e\n\u003cli\u003e17 ft \/ 5.18 m SX Series RCA cable\u003c\/li\u003e\n\u003cli\u003e17 ft \/ 5.18 m 18-gauge blue remote turn-on wire\u003c\/li\u003e\n\u003cli\u003e20 ft \/ 6.10 m 16-gauge premium speaker wire\u003c\/li\u003e\n\u003cli\u003eANL heat-resistant fuse holder\u003c\/li\u003e\n\u003cli\u003e100-amp ANL fuse\u003c\/li\u003e\n\u003cli\u003e6 ft \/ 1.83 m split loom\u003c\/li\u003e\n\u003cli\u003eRing terminals and installation accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: COMP4-ANL\u003c\/li\u003e\n\u003cli\u003eSeries: Competition Series\u003c\/li\u003e\n\u003cli\u003ePower-wire size: 4 gauge\u003c\/li\u003e\n\u003cli\u003ePower-wire material: CCA\u003c\/li\u003e\n\u003cli\u003eGround-wire size: 4 gauge\u003c\/li\u003e\n\u003cli\u003eGround-wire material: CCA\u003c\/li\u003e\n\u003cli\u003eIncluded main fuse: 100-amp ANL\u003c\/li\u003e\n\u003cli\u003eWire voltage rating: 12–48 volts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"DB Link","offers":[{"title":"Default Title","offer_id":51699755581673,"sku":"COMP4-ANL","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/db-link-compk4-anl-closeout.jpg?v=1787268149"},{"product_id":"ds18-pro-drn1-neodymium-compression-driver-clearance","title":"DS18 PRO-DRN1 1-Inch Neodymium Compression Driver — Closeout","description":"\u003ch2\u003eDS18 PRO-DRN1 1-Inch-Throat Neodymium Compression Driver\u003c\/h2\u003e\u003cp\u003eBuilding a loud horn section but do not want a big ferrite compression driver hanging off the back of the waveguide? That is where the PRO-DRN1 makes sense. It uses a neodymium motor to keep the driver compact while still giving you the efficiency and projection expected from a real compression driver.\u003c\/p\u003e\u003cp\u003eDS18 rates the PRO-DRN1 at 150 watts RMS, 300 watts maximum and 110 dB sensitivity. That efficiency is what makes this useful in a pro-audio door, motorcycle, powersports or other high-output system: you are using the horn and driver to create strong vocal and high-frequency output instead of trying to force a conventional dome tweeter to keep up with a bank of loud mids.\u003c\/p\u003e\u003cp\u003eThe driver uses a 1.75-inch \/ 44.5 mm titanium diaphragm and an 8-ohm voice coil with a 1-inch bolt-on throat. DS18 publishes a 500 Hz–18 kHz response and recommends a 600 Hz high-pass crossover. The final crossover still needs to make sense for the horn, amplifier power and system layout, but those published numbers give us the operating range DS18 designed around.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is the compression driver only; it still needs a compatible 1-inch bolt-on horn or waveguide. It is not a full-range speaker and it is not meant to produce midbass. The 8-ohm impedance also needs to be considered when choosing the amplifier and when wiring multiple drivers on the same channel.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: PRO-DRN1\u003c\/li\u003e\n\u003cli\u003eProduct type: neodymium compression driver\u003c\/li\u003e\n\u003cli\u003eThroat diameter: 1 inch \/ 25.4 mm\u003c\/li\u003e\n\u003cli\u003eMounting type: bolt-on\u003c\/li\u003e\n\u003cli\u003eVoice-coil diameter: 1.75 inches \/ 44.5 mm\u003c\/li\u003e\n\u003cli\u003eDiaphragm material: titanium\u003c\/li\u003e\n\u003cli\u003eVoice-coil winding material: pure aluminum ribbon wire\u003c\/li\u003e\n\u003cli\u003eMagnet material: neodymium\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 ohms\u003c\/li\u003e\n\u003cli\u003eRMS power handling: 150 watts\u003c\/li\u003e\n\u003cli\u003eMaximum power handling: 300 watts\u003c\/li\u003e\n\u003cli\u003eSensitivity: 110 dB (1 W \/ 1 m)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 500 Hz–18 kHz\u003c\/li\u003e\n\u003cli\u003eRecommended high-pass crossover: 600 Hz\u003c\/li\u003e\n\u003cli\u003eOverall depth: 2 inches \/ 51 mm\u003c\/li\u003e\n\u003cli\u003eOverall width: 4 inches \/ 102 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":51703037559017,"sku":"PRO-DRN1-CLOSEOUT","price":73.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ds18-pro-drn1-clearance.jpg?v=1787323321"},{"product_id":"ill-customz-2-spot-anl-fuse-block-old-style-clearance","title":"ILL Customz 2-Spot Lug Style ANL Fuse Block – Old 3D-Printed Style – Clearance","description":"\u003ch2\u003eILL Customz 2-Spot Lug-Style ANL Fuse Block — Older 3D-Printed Version\u003c\/h2\u003e\u003cp\u003eRunning a high-current car-audio system and need two ANL fuse positions in one clean block instead of mounting separate holders all over the amp rack? That is the job this ILL Customz 2-spot block is built for. It keeps two fused circuits together, uses stud-style connections for ring-terminal cable lugs and gives the power section a cleaner, easier-to-service layout.\u003c\/p\u003e\u003cp\u003eThis is the older 3D-printed version of ILL Customz's 2-spot lug-style design, not the current injection-molded housing. The basic job is the same: two ANL fuse positions, four stud terminals and a clear logo cover over the fuse area. If the build already uses lug-terminated cable, this style makes sense because you are bolting the cable connection down instead of trying to clamp large wire directly into a set-screw block.\u003c\/p\u003e\u003cp\u003eThe actual piece has the clear cover's removable protective film still in place. That film can look cloudy or scratched in the photo, but it is there to protect the acrylic surface during handling. ANL fuses and cable lugs are not included, so those need to be selected for the wire size and current requirement of the circuits being protected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this block does not determine the correct fuse size for the system and it does not replace proper source-side protection on the main power feed. It is also the older 3D-printed housing, so if you specifically want ILL Customz's current injection-molded construction, use the current-production version instead.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: ILL Customz\u003c\/li\u003e\n\u003cli\u003eProduct type: lug-style ANL fuse block\u003c\/li\u003e\n\u003cli\u003eFuse positions: 2\u003c\/li\u003e\n\u003cli\u003eConnection style: stud \/ ring-terminal lug\u003c\/li\u003e\n\u003cli\u003eStud terminals: 4\u003c\/li\u003e\n\u003cli\u003eHousing: older 3D-printed version\u003c\/li\u003e\n\u003cli\u003eCover: clear acrylic with ILL Customz logo\u003c\/li\u003e\n\u003cli\u003eANL fuses: not included\u003c\/li\u003e\n\u003cli\u003eCable lugs: not included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ILL Customz","offers":[{"title":"Default Title","offer_id":51703057449193,"sku":"ILL-2SPOT-ANL-OLD-CLEARANCE","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ill-customz-2-spot-anl-fuse-block-old-style-clearance.jpg?v=1787323635"},{"product_id":"ill-customz-4-spot-anl-fuse-block-old-style-clearance","title":"ILL Customz 4-Spot Lug Style ANL Fuse Block – Old 3D-Printed Style – Clearance","description":"\u003ch2\u003eILL Customz 4-Spot Lug-Style ANL Fuse Block — Older 3D-Printed Version\u003c\/h2\u003e\u003cp\u003eBuilding a larger amp rack and need four separately fused high-current circuits without spreading fuse holders across the whole panel? This 4-spot ILL Customz block puts all four ANL fuse positions in one place, which makes the power section easier to lay out, easier to inspect and easier to service later.\u003c\/p\u003e\u003cp\u003eThe lug-style design is useful when the system is already using ring-terminal cable ends. Instead of inserting bare cable into set-screw terminals, each circuit bolts down to a stud connection. This older version uses ILL Customz's earlier 3D-printed housing with a clear logo cover rather than the current injection-molded base, but the layout is still built around four ANL fuse positions and eight stud terminals.\u003c\/p\u003e\u003cp\u003eThe actual block pictured still has protective film on the clear cover. That film can make the acrylic look cloudy or scratched before it is removed. ANL fuses and cable lugs are not included, so each circuit still needs the correct fuse value and properly sized lug for the wire and equipment it is protecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this does not replace the main fuse protecting the feed from the battery, and it does not make four circuits safe just because they share one block. Each branch needs a fuse sized for its own cable and load. If you specifically want the construction used on ILL Customz's current injection-molded fuse blocks, this older 3D-printed version is not that piece.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: ILL Customz\u003c\/li\u003e\n\u003cli\u003eProduct type: lug-style ANL fuse block\u003c\/li\u003e\n\u003cli\u003eFuse positions: 4\u003c\/li\u003e\n\u003cli\u003eConnection style: stud \/ ring-terminal lug\u003c\/li\u003e\n\u003cli\u003eStud terminals: 8\u003c\/li\u003e\n\u003cli\u003eHousing: older 3D-printed version\u003c\/li\u003e\n\u003cli\u003eCover: clear acrylic with ILL Customz logo\u003c\/li\u003e\n\u003cli\u003eANL fuses: not included\u003c\/li\u003e\n\u003cli\u003eCable lugs: not included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ILL Customz","offers":[{"title":"Default Title","offer_id":51703069081833,"sku":"ILL-4SPOT-ANL-OLD-CLEARANCE","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ill-customz-4-spot-anl-fuse-block-old-style-clearance.jpg?v=1787323649"},{"product_id":"rogue-car-audio-rf2-replacement-titanium-diaphragm-clearance","title":"Rogue Car Audio RF2 Replacement Titanium Diaphragm — Single — Clearance","description":"\u003ch2\u003eRogue Car Audio RF2 Replacement Titanium Diaphragm — Single\u003c\/h2\u003e\u003cp\u003eGot a Rogue RF2 horn driver with a failed diaphragm, but the rest of the driver is still usable? This is the service part that lets you repair the failed diaphragm section instead of replacing the complete horn driver.\u003c\/p\u003e\u003cp\u003eThe RF2 was Rogue Car Audio's Ferrite Series horn driver, and this replacement uses a titanium diaphragm for that application. If the motor, horn and mounting hardware are still in good shape, replacing the diaphragm can keep the original driver in the system and avoid changing a working setup over one serviceable part.\u003c\/p\u003e\u003cp\u003eThis is especially useful when you already have multiple RF2 drivers in the same build. Keeping the matching driver body and replacing the failed service part makes more sense than dropping a different horn driver into one position and changing the way that section of the system behaves.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a complete compression driver and it is not being sold as a universal diaphragm. It will not repair a damaged magnet structure, horn, phase plug, mounting surface or other mechanical failure. Match the original Rogue RF2 driver before installing the replacement.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eApplication: Rogue Car Audio RF2 Ferrite Series Horn Driver\u003c\/li\u003e\n\u003cli\u003eProduct type: replacement diaphragm\u003c\/li\u003e\n\u003cli\u003eDiaphragm material: titanium\u003c\/li\u003e\n\u003cli\u003eQuantity: one diaphragm\u003c\/li\u003e\n\u003cli\u003eComplete horn driver: not included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rogue Car Audio","offers":[{"title":"Default Title","offer_id":51703253598441,"sku":"ROGUE-RF2-DIAPHRAGM","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/rogue-rf2-replacement-diaphragm-clearance.jpg?v=1787329911"},{"product_id":"ds18-pro-tw420vc-replacement-diaphragm-clearance-sold-individually","title":"DS18 PRO-TW420VC Replacement Diaphragm — Clearance","description":"\u003ch2\u003eDS18 PRO-TW420VC Replacement Diaphragm\u003c\/h2\u003e\u003cp\u003eGot a DS18 PRO-TW420 super tweeter with a failed diaphragm but the rest of the tweeter is still worth saving? The PRO-TW420VC is the service assembly DS18 lists for that model. It gives you a way to repair the working tweeter body instead of replacing the complete unit over one serviceable failure.\u003c\/p\u003e\u003cp\u003eThe PRO-TW420 itself is a 4-ohm high-output super tweeter, so getting the correct replacement assembly matters if you want the repaired tweeter to stay matched to the rest of the system. This is the part number DS18 specifies for the PRO-TW420.\u003c\/p\u003e\u003cp\u003eUse PRO-TW420 as the direct-fit reference. For another tweeter model, verify the physical dimensions and diaphragm geometry before installation; impedance alone does not make replacement diaphragms interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a complete tweeter. It only services the diaphragm\/voice-coil section and will not repair a damaged magnet, housing, bullet, mounting hardware or other mechanical problem. If the original tweeter has damage beyond the service assembly, replace the complete tweeter.\u003c\/p\u003e\u003ch3\u003eManufacturer Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: PRO-TW420VC\u003c\/li\u003e\n\u003cli\u003eProduct type: replacement tweeter diaphragm \/ voice-coil assembly\u003c\/li\u003e\n\u003cli\u003eDirect-fit compatibility: DS18 PRO-TW420\u003c\/li\u003e\n\u003cli\u003ePRO-TW420 nominal impedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eQuantity: sold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":51703264903401,"sku":"PRO-TW420VC","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ds18-pro-tw420vc-factory_cec0c57f-32a8-41e8-8bcb-52c80d3211d6.jpg?v=1787333100"},{"product_id":"ds18-pro-dkn1xsvc-2-titanium-replacement-diaphragm-clearance-sold-individually","title":"DS18 PRO-DKN1XSVC 2-Inch Titanium Replacement Diaphragm — Clearance","description":"\u003ch2\u003eDS18 PRO-DKN1XSVC 2-Inch Titanium Replacement Diaphragm\u003c\/h2\u003e\u003cp\u003eGot a PRO-DKN1XS or PRO-DKN1PXS compression driver that stopped playing cleanly, but the motor and rest of the driver are still good? You do not automatically need to replace the complete driver. The PRO-DKN1XSVC is the service diaphragm\/voice-coil assembly DS18 lists for those models, giving you a way to repair the failed section and put the existing driver back to work.\u003c\/p\u003e\u003cp\u003eThis is a 2-inch \/ 51 mm titanium diaphragm with an 8-ohm voice coil. That matches the construction DS18 designed around the PRO-DKN1XS family, so you can keep the original horn, motor and system layout instead of replacing a working assembly because one serviceable part failed.\u003c\/p\u003e\u003cp\u003eDS18 also lists the PRO-DKN1XSVC for compatible universal 8-ohm applications. We would treat that as a compatibility option, not a promise that every 2-inch 8-ohm compression driver uses the same dimensions. If it is going into anything other than the published DS18 models, the physical fit and diaphragm geometry need to match before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e a replacement diaphragm only fixes a failure in the diaphragm\/voice-coil assembly. It will not repair a damaged magnet structure, phase plug, mounting surface or other mechanical damage in the driver, and it is not the correct service part for a 4-ohm driver. Check the original driver before ordering parts instead of assuming every no-output condition is a bad diaphragm.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: PRO-DKN1XSVC\u003c\/li\u003e\n\u003cli\u003eProduct type: replacement diaphragm \/ voice-coil assembly\u003c\/li\u003e\n\u003cli\u003eVoice-coil diameter: 2 inches \/ 51 mm\u003c\/li\u003e\n\u003cli\u003eDiaphragm material: titanium\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 ohms\u003c\/li\u003e\n\u003cli\u003ePublished compatibility: PRO-DKN1XS and PRO-DKN1PXS\u003c\/li\u003e\n\u003cli\u003eAdditional application: compatible universal 8-ohm use\u003c\/li\u003e\n\u003cli\u003eQuantity: sold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":51703264968937,"sku":"PRO-DKN1XSVC","price":11.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ds18-pro-dkn1xsvc-factory_d57da0e1-e75b-496f-a642-c2742026934e.jpg?v=1787333105"},{"product_id":"ds18-pro-drn1vc-replacement-diaphragm-clearance-sold-individually","title":"DS18 PRO-DRN1VC Replacement Diaphragm — Clearance","description":"\u003ch2\u003eDS18 PRO-DRN1VC Titanium Replacement Diaphragm\u003c\/h2\u003e\u003cp\u003eGot a DS18 PRO-DRN1 compression driver with a failed diaphragm, but the neodymium motor and horn are still usable? This is the factory replacement part DS18 lists for that driver. Instead of replacing the complete compression-driver assembly, the PRO-DRN1VC lets you service the diaphragm\/voice-coil section and keep the rest of the system in place.\u003c\/p\u003e\u003cp\u003eThe replacement uses a titanium diaphragm and an 8-ohm coil, matching the impedance of the PRO-DRN1 driver. That makes this the part to look at when the original driver model is known and the failure is isolated to the replaceable diaphragm assembly.\u003c\/p\u003e\u003cp\u003eDS18 also lists the PRO-DRN1VC for compatible universal 8-ohm applications. We would not treat that as automatic fitment for every 8-ohm compression driver. The mounting pattern, diaphragm geometry and electrical fit still need to match before using it outside the published PRO-DRN1 application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a complete compression driver and it will not repair damage to the magnet structure, phase plug, horn or mounting surfaces. If the original driver has mechanical damage beyond the diaphragm assembly, replacing the complete driver is the better repair.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: PRO-DRN1VC\u003c\/li\u003e\n\u003cli\u003eProduct type: replacement diaphragm \/ voice-coil assembly\u003c\/li\u003e\n\u003cli\u003eDiaphragm material: titanium\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 ohms\u003c\/li\u003e\n\u003cli\u003ePublished compatibility: DS18 PRO-DRN1\u003c\/li\u003e\n\u003cli\u003eAdditional application: compatible universal 8-ohm use\u003c\/li\u003e\n\u003cli\u003eQuantity: sold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":51703265067241,"sku":"PRO-DRN1VC","price":11.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ds18-pro-drn1vc-factory_cf8e38a6-44eb-4e19-9311-935fe4e0e650.jpg?v=1787333111"},{"product_id":"ds18-pro-dkn25vc-1-phenolic-replacement-diaphragm-clearance-sold-individually","title":"DS18 PRO-DKN25VC 1-Inch Phenolic Replacement Diaphragm — Clearance","description":"\u003ch2\u003eDS18 PRO-DKN25VC 1-Inch Phenolic Replacement Diaphragm\u003c\/h2\u003e\u003cp\u003eGot a DS18 PRO-DKN25 compression driver that quit, but the motor and horn are still good? This is the service part that can save the rest of the driver. The PRO-DKN25VC replaces the 1-inch diaphragm\/voice-coil assembly, so you can repair the failed section instead of throwing away the complete horn and driver.\u003c\/p\u003e\u003cp\u003eDS18 builds the PRO-DKN25 around a 1-inch phenolic diaphragm and 8-ohm voice coil, and this is the replacement part it specifically lists for that driver. That keeps the repair matched to the original design rather than trying to make an unrelated diaphragm work in a driver it was not built for.\u003c\/p\u003e\u003cp\u003eDS18 also markets the replacement for compatible universal 8-ohm applications. We would only use it that way after confirming the physical dimensions and diaphragm geometry match the driver being repaired. Impedance alone does not make two replacement diaphragms interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this only services the diaphragm\/voice-coil section. It will not fix a damaged motor, horn, phase plug or other mechanical problem in the original driver. If the complete driver is damaged or the application is not compatible with this 1-inch 8-ohm assembly, replacing the whole driver may make more sense.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: PRO-DKN25VC\u003c\/li\u003e\n\u003cli\u003eProduct type: replacement diaphragm \/ voice-coil assembly\u003c\/li\u003e\n\u003cli\u003eVoice-coil diameter: 1 inch\u003c\/li\u003e\n\u003cli\u003eDiaphragm material: phenolic\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 8 ohms\u003c\/li\u003e\n\u003cli\u003ePublished compatibility: DS18 PRO-DKN25\u003c\/li\u003e\n\u003cli\u003eAdditional application: compatible universal 8-ohm use\u003c\/li\u003e\n\u003cli\u003eQuantity: sold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":51703266050281,"sku":"PRO-DKN25VC","price":2.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ds18-pro-dkn25vc-factory_b281c607-ad64-47bc-ae29-ab9f9068eb06.jpg?v=1787333116"},{"product_id":"xs-power-li1208-12v-8a-lithium-intellicharger-clearance","title":"XS Power Li1208 12V 8A Lithium IntelliCharger — Clearance","description":"\u003cp\u003eHave a 12-volt lithium battery? Do not assume the old lead-acid charger on the shelf is the right tool for it. The Li1208 is an 8-amp lithium charger with microprocessor-controlled charging and built-in protection. Match the battery chemistry and its charging requirements before plugging anything in.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModel: Li1208\u003c\/li\u003e\n\u003cli\u003e12V lithium battery charger\u003c\/li\u003e\n\u003cli\u003e8-amp output\u003c\/li\u003e\n\u003cli\u003eMicroprocessor-optimized charging\u003c\/li\u003e\n\u003cli\u003eConstant-current \/ constant-voltage charging\u003c\/li\u003e\n\u003cli\u003eLED charging and status indicators\u003c\/li\u003e\n\u003cli\u003eAuto under-voltage \/ 10-hour shutoff\u003c\/li\u003e\n\u003cli\u003eReverse-polarity, short-circuit and overload protection\u003c\/li\u003e\n\u003cli\u003eIntegrated cooling fan\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eVerify battery chemistry and charging requirements before use.\u003c\/p\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":51703334994153,"sku":"Li1208","price":84.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/xs-power-li1208-factory_63c5c79e-ca60-4dbe-b840-bedc894e717e.jpg?v=1787333453"},{"product_id":"ds18-flmbps-bkv2-swivel-flat-mount-bracket-black-clearance","title":"DS18 FLMBPS\/BKV2 Swivel Flat Mount Bracket – Black – Clearance","description":"\u003ch2\u003eDS18 FLMBPS\/BKV2 Swivel Flat Mount Bracket — Black\u003c\/h2\u003e\u003cp\u003eWant to use a compatible DS18 NXL-PS or CF-PS tower speaker, but the vehicle or boat does not have a tube where the speaker actually needs to go? That is what the FLMBPS\/BKV2 fixes. It converts the tower-speaker mounting setup to a flat surface, giving you another way to put the speaker where it works instead of letting the available tubing decide the entire system layout.\u003c\/p\u003e\u003cp\u003eThe swivel design is the useful part once the bracket is mounted. DS18 gives you up to 30 degrees of tilt, and the pivoting connection lets the speaker be aimed toward the listening area. That matters on boats, UTVs and custom powersports builds where a speaker can be mounted securely and still sound wrong if it is firing past the people who are supposed to hear it.\u003c\/p\u003e\u003cp\u003eDS18 builds the bracket from die-cast Kirksite, an alloy based on zinc with aluminum and copper additives. The black version uses a matte-black finish, and the bracket is sold individually. That last part matters when planning a pair of tower speakers: one bracket mounts one compatible tower speaker, so order the quantity the installation actually requires.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a universal bracket for every DS18 tower enclosure. DS18 publishes compatibility with its CF-PS and NXL-PS tower speakers. If the enclosure is from the NXL-X \/ CF-X family or another tower series, use the bracket DS18 specifies for that speaker instead of assuming the mounting hardware is interchangeable.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel \/ SKU: FLMBPS\/BKV2\u003c\/li\u003e\n\u003cli\u003eType: swivel flat-mount bracket adapter\u003c\/li\u003e\n\u003cli\u003eCompatible tower series: DS18 CF-PS and NXL-PS\u003c\/li\u003e\n\u003cli\u003eAdjustment: up to 30° of tilt\u003c\/li\u003e\n\u003cli\u003eMaterial: die-cast Kirksite alloy\u003c\/li\u003e\n\u003cli\u003eAlloy composition: zinc with aluminum and copper additives\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eFinish: matte black\u003c\/li\u003e\n\u003cli\u003eQuantity: sold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":51703392633065,"sku":"FLMBPS\/BKV2","price":49.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ds18-flmbps-bkv2-clearance.jpg?v=1787335830"},{"product_id":"ds18-pro-tw120vc-replacement-diaphragm-4-ohm-sold-individually","title":"DS18 PRO-TW120VC 4-Ohm Replacement Diaphragm — Clearance","description":"\u003ch2\u003eDS18 PRO-TW120VC 4-Ohm Replacement Diaphragm\u003c\/h2\u003e\u003cp\u003eGot a PRO-TW120 or PRO-TW120B tweeter that stopped playing cleanly, but the rest of the tweeter is still in good shape? The PRO-TW120VC is the service part DS18 designed for that repair. Instead of replacing the complete tweeter, you can replace the diaphragm\/voice-coil assembly and keep the existing mount and system layout.\u003c\/p\u003e\u003cp\u003eDS18 uses a 1-inch titanium voice coil with a 4-ohm impedance in this replacement. That is the important match when repairing the PRO-TW120 family: the correct diaphragm keeps the electrical load and working assembly consistent with the tweeter the system was built around.\u003c\/p\u003e\u003cp\u003eThe PRO-TW120VC may also work in compatible universal 1-inch tweeter-repair applications. We would still verify the mechanical fit before using it outside the PRO-TW120 or PRO-TW120B. Matching voice-coil size and impedance does not guarantee every tweeter uses the same diaphragm geometry or mounting pattern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is the replacement diaphragm only, not a complete tweeter. It will not fix a damaged magnet structure, housing or other mechanical failure, and it is not the correct part for an 8-ohm version. Diagnose the original tweeter before replacing parts.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: PRO-TW120VC\u003c\/li\u003e\n\u003cli\u003eProduct type: replacement tweeter diaphragm \/ voice-coil assembly\u003c\/li\u003e\n\u003cli\u003eVoice-coil size: 1 inch\u003c\/li\u003e\n\u003cli\u003eVoice-coil \/ diaphragm material: titanium\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003ePublished compatibility: DS18 PRO-TW120 and PRO-TW120B\u003c\/li\u003e\n\u003cli\u003eAdditional application: compatible universal 1-inch tweeter repair\u003c\/li\u003e\n\u003cli\u003eQuantity: sold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":51703612014825,"sku":"PRO-TW120VC","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ds18-pro-tw120vc-replacement-diaphragm.jpg?v=1787348299"},{"product_id":"ds18-pro-tw220vc-replacement-diaphragm-for-pro-tw220-closeout","title":"DS18 PRO-TW220VC Replacement Diaphragm — Closeout","description":"\u003ch2\u003eDS18 PRO-TW220VC Replacement Diaphragm\u003c\/h2\u003e\u003cp\u003eGot a DS18 PRO-TW220 tweeter with a failed diaphragm but the housing and motor are still good? The PRO-TW220VC is the replacement assembly DS18 lists for that tweeter, so you can service the failed section instead of replacing the complete tweeter.\u003c\/p\u003e\u003cp\u003eThat makes the most sense when the system already uses PRO-TW220s and you want the repaired side to stay matched to the rest of the setup. The PRO-TW220 is a 4-ohm super tweeter, and this replacement is intended to restore the working diaphragm\/voice-coil section while keeping the original body, mounting location and system design.\u003c\/p\u003e\u003cp\u003eUse the PRO-TW220 model number as the direct-fit reference. Verify dimensions before installing this part in any other tweeter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is the service diaphragm only, not a complete tweeter. It will not repair a damaged magnet structure, housing or mounting hardware. If the original tweeter has damage beyond the diaphragm assembly, replace the complete tweeter instead of trying to solve a mechanical problem with a voice-coil repair.\u003c\/p\u003e\u003ch3\u003eManufacturer Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: PRO-TW220VC\u003c\/li\u003e\n\u003cli\u003eProduct type: replacement tweeter diaphragm \/ voice-coil assembly\u003c\/li\u003e\n\u003cli\u003ePrimary published compatibility: DS18 PRO-TW220\u003c\/li\u003e\n\u003cli\u003ePRO-TW220 nominal impedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eQuantity: sold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DS18","offers":[{"title":"Default Title","offer_id":51703613391081,"sku":"PRO-TW220VC","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/ds18-pro-tw220vc-closeout.jpg?v=1787348351"},{"product_id":"closeout-diamond-audio-m01trk-mrd-1-tweeter-replacement-diaphragm","title":"Diamond Audio M01TRK \/ MRD 1-Inch Tweeter Replacement Diaphragm — Closeout","description":"\u003ch2\u003eDiamond Audio M01TRK \/ MRD 1-Inch Tweeter Replacement Diaphragm\u003c\/h2\u003e\u003cp\u003eGot a Diamond Motorsport tweeter with a damaged diaphragm but the rest of the driver is still worth saving? This is the service part that lets you repair the tweeter instead of replacing the complete assembly. This listing carries the M01TRK \/ MRD reference; Diamond Audio currently publishes the MRD as its 1-inch replacement diaphragm for the compatible models listed below.\u003c\/p\u003e\u003cp\u003eDiamond Audio lists the MRD for the M01T, M01SWT, M1SRT and M175T tweeters. That makes this the right part when the motor and horn assembly are still good and the failure is in the diaphragm\/voice-coil section. Replacing the service part can put the original tweeter back to work without changing the rest of the system or having to match a different tweeter into the existing install.\u003c\/p\u003e\u003cp\u003eDiamond rates the MRD diaphragm at 50 watts RMS \/ 100 watts maximum with 107 dB sensitivity. Those are the published ratings for the replacement diaphragm application, so the repaired tweeter still needs to be crossed over and powered the way the compatible Diamond tweeter was designed to operate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this diaphragm does not fit every Diamond tweeter. Diamond specifically states that the MRD is not compatible with the M075T. If the tweeter model is not M01T, M01SWT, M1SRT or M175T, verify the correct replacement diaphragm before taking the driver apart.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCurrent Diamond Audio part number: MRD\u003c\/li\u003e\n\u003cli\u003eProduct type: 1-inch replacement tweeter diaphragm\u003c\/li\u003e\n\u003cli\u003ePower handling: 50 watts RMS \/ 100 watts maximum\u003c\/li\u003e\n\u003cli\u003eSensitivity: 107 dB\u003c\/li\u003e\n\u003cli\u003eQuantity: sold individually\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePublished Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDiamond Audio M01T\u003c\/li\u003e\n\u003cli\u003eDiamond Audio M01SWT\u003c\/li\u003e\n\u003cli\u003eDiamond Audio M1SRT\u003c\/li\u003e\n\u003cli\u003eDiamond Audio M175T\u003c\/li\u003e\n\u003cli\u003eNot compatible with Diamond Audio M075T\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"Diamond Audio","offers":[{"title":"Default Title","offer_id":51703615291625,"sku":"M01TRK","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/diamond-audio-m01trk-tweeter-diaphragm-closeout.jpg?v=1787348391"},{"product_id":"lasfit-lo-jps01-jeep-aux-switch-panel-kit-a-closeout","title":"LASFIT LO-JPS01 Jeep Wrangler JL \u0026 Gladiator JT Auxiliary Switch Panel — Closeout","description":"\u003ch2\u003eLASFIT LO-JPS01 Jeep Wrangler JL \/ Gladiator JT Auxiliary Switch Panel\u003c\/h2\u003e\u003cp\u003eAdding lights and other 12-volt accessories to a Wrangler JL or Gladiator JT and tired of hanging universal toggle switches under the dash? That is what the LO-JPS01 is for. LASFIT gives you four OEM-style auxiliary switches in the factory-style dash location, along with the relay and fuse hardware needed to control the accessory circuits without requiring a dealer software flash.\u003c\/p\u003e\u003cp\u003eThe four switches run through a waterproof relay\/fuse box with four 30-amp fused relay circuits. LASFIT provides connection points inside the cabin and in the engine compartment, which gives us cleaner options for routing accessory wiring depending on where the equipment is installed. Those two connection locations share the same four circuits; they are not eight separate switched outputs.\u003c\/p\u003e\u003cp\u003eThis Kit A version is the black four-switch assembly. It makes sense when LO-JPS01 is the correct switch configuration for the Jeep and you need four auxiliary controls. The system is rated for 12 volts, up to 800 watts total, and the relay\/fuse box carries an IP66 rating. No ECU programming or dealer activation is required after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e LASFIT states that LO-JPS01 is not compatible with manual-transmission vehicles. It also is not the correct expansion kit for every factory switch configuration. If the Jeep already has the factory Mopar black AUX switch bank, LASFIT directs that application to a different expansion kit. If you are planning a full eight-switch LASFIT setup on a Jeep with no factory auxiliary bank, LASFIT recommends the appropriate full-kit combination rather than assuming Kit A alone provides eight circuits.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: LO-JPS01\u003c\/li\u003e\n\u003cli\u003eKit configuration: Kit A, black four-switch auxiliary panel\u003c\/li\u003e\n\u003cli\u003eAccessory controls: 4\u003c\/li\u003e\n\u003cli\u003eSystem voltage: 12 V\u003c\/li\u003e\n\u003cli\u003eRelay\/fuse circuits: four 30 A circuits\u003c\/li\u003e\n\u003cli\u003eTotal output rating: 800 watts\u003c\/li\u003e\n\u003cli\u003eOutput connection locations: cabin and engine compartment\u003c\/li\u003e\n\u003cli\u003eRelay\/fuse box protection rating: IP66\u003c\/li\u003e\n\u003cli\u003eDealer software update \/ ECU flash: not required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment and Configuration\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for compatible Jeep Wrangler JL and Jeep Gladiator JT applications\u003c\/li\u003e\n\u003cli\u003eNot compatible with manual-transmission vehicles\u003c\/li\u003e\n\u003cli\u003eVerify exact model year, transmission and existing factory switch-bank configuration before purchase\u003c\/li\u003e\n\u003cli\u003eUse the LASFIT kit specified for the Jeep's existing switch layout when adding or expanding auxiliary controls\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LASFIT","offers":[{"title":"Default Title","offer_id":51703638491369,"sku":"LO-JPS01","price":161.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/lasfit-lo-jps01-jeep-aux-switch-panel-01.jpg?v=1787348743"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/collections\/clearance-sales_71b411e4-6ea0-486a-b427-b71f19698773.webp?v=1789013876","url":"https:\/\/smscaraudio.com\/collections\/new-closeout-car-audio-deals.oembed","provider":"SMS Car Audio","version":"1.0","type":"link"}