{"title":"Used Car Audio \u0026 Equipment","description":"\u003cp\u003eUsed car audio and related equipment. Review each listing for exact condition, included parts and final-sale details.\u003c\/p\u003e","products":[{"product_id":"mb-quart-pa1-800-4-premium-pro-4-channel-amplifier-used","title":"MB Quart PA1-800.4 4-Channel Amplifier — Used Closeout","description":"\u003ch2\u003eMB Quart PA1-800.4 Premium Pro 4-Channel Amplifier — Used Closeout\u003c\/h2\u003e\u003cp\u003eIf you need four solid full-range channels but do not need the size, current demand, or output of the PA1-2400.4, the PA1-800.4 is the more sensible amplifier. MB Quart rates it at 100 watts × 4 at 4 ohms, 200 watts × 4 at 2 ohms, or 400 watts × 2 bridged at 4 ohms. That puts it in a useful range for door speakers, component sets, rear fill, or two compatible higher-power 4-ohm loads when the channels are bridged.\u003c\/p\u003e\u003cp\u003eThis is the smaller PA1 four-channel, and that matters in a real install. The chassis is only 5.81 × 4.45 × 2.0 inches, MB Quart specifies 8 AWG power and ground connections, and the published external fuse requirement is 80 amps. The PA1-2400.4 is the right move when the system is built around high-output pro-audio speakers or heavy midbass and needs several hundred watts per channel. The PA1-800.4 makes more sense when the speakers do not need that level of power and keeping the rack compact is more important than buying amplifier headroom you will never use.\u003c\/p\u003e\u003ch3\u003eWhere We Would Use It\u003c\/h3\u003e\u003cp\u003eA straightforward four-speaker system is the obvious fit: front components or coaxials on two channels and rear speakers on the other two. It can also run two higher-power 4-ohm loads at up to 400 watts per channel when bridged. Bridging changes both the available channel count and the minimum load, so this is not a 400-watt-per-channel four-channel amp and MB Quart does not publish a 2-ohm bridged rating.\u003c\/p\u003e\u003cp\u003eThe built-in high-pass and low-pass filters adjust from 45 Hz to 850 Hz on both channel pairs. That is useful for protecting door speakers, band-limiting midbass, or dividing basic speaker roles, but it is not a substitute for a DSP in a fully active multi-way system that needs crossover points above 850 Hz, independent time alignment, EQ, or more precise filter control.\u003c\/p\u003e\u003ch3\u003eFactory Radio Integration\u003c\/h3\u003e\u003cp\u003eThe PA1-800.4 accepts both low-level RCA and high-level speaker inputs. High-level input can make connection to an OEM source easier, but it does not automatically correct factory EQ, all-pass filters, bass roll-off, channel summing requirements, or other processing built into many factory systems. On a processed factory radio, the signal still needs to be checked before deciding that speaker-level input alone is the right integration method.\u003c\/p\u003e\u003ch3\u003eUsed Closeout\u003c\/h3\u003e\u003cp\u003eThis listing is for the used-closeout PA1-800.4, not a new retail unit. The reason to buy this one is value when the amplifier's channel count, impedance requirements, power range, and physical size already fit the build. Do not choose it only because it is less expensive than the PA1-2400.4; choose it when roughly 100 watts per channel at 4 ohms or 200 watts per channel at 2 ohms is actually the correct power range for the speakers being used. This is a final-sale closeout item.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePA1-800.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeries\u003c\/th\u003e\n\u003ctd\u003ePremium Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAmplifier class\u003c\/th\u003e\n\u003ctd\u003eFull-range Class D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannels\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePublished power at 4 ohms\u003c\/th\u003e\n\u003ctd\u003e100 watts × 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePublished power at 2 ohms\u003c\/th\u003e\n\u003ctd\u003e200 watts × 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePublished bridged power at 4 ohms\u003c\/th\u003e\n\u003ctd\u003e400 watts × 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHigh-pass filter\u003c\/th\u003e\n\u003ctd\u003e45 Hz–850 Hz, 12 dB\/octave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-pass filter\u003c\/th\u003e\n\u003ctd\u003e45 Hz–850 Hz, 12 dB\/octave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLow-level input range\u003c\/th\u003e\n\u003ctd\u003e0.3–5.5 volts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHigh-level input range\u003c\/th\u003e\n\u003ctd\u003e2.8–40 volts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e10 Hz–30 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal-to-noise ratio\u003c\/th\u003e\n\u003ctd\u003eGreater than 102 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTHD\u003c\/th\u003e\n\u003ctd\u003e1.0%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower and ground terminal\u003c\/th\u003e\n\u003ctd\u003e8 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSpeaker terminal\u003c\/th\u003e\n\u003ctd\u003e10 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExternal fuse requirement\u003c\/th\u003e\n\u003ctd\u003e80 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAmplifier dimensions\u003c\/th\u003e\n\u003ctd\u003e5.81 × 4.45 × 2.0 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eManufacturer Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLow-noise preamplifier circuit\u003c\/li\u003e\n\u003cli\u003eTwo pairs of nickel-plated RCA inputs\u003c\/li\u003e\n\u003cli\u003eHigh-level speaker input capability\u003c\/li\u003e\n\u003cli\u003ePWM MOSFET power supply\u003c\/li\u003e\n\u003cli\u003eExtruded aluminum heat sink with built-in fan cooling\u003c\/li\u003e\n\u003cli\u003eThermal, overload, DC and speaker-short protection diagnostics\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlan speaker impedance, any bridged load, power cable, external fuse, grounding, airflow, and the vehicle's electrical capacity before installation.\u003c\/p\u003e","brand":"MB Quart","offers":[{"title":"Default Title","offer_id":51431626342633,"sku":"PA1-800-4-2-USED","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/rn-image_picker_lib_temp_f7709205-42f2-4996-b5bf-86e6b274f203.png?v=1780963972"},{"product_id":"mosconi-atomo-4-6-dsp-processor-used-closeout","title":"Mosconi ATOMO 4|6 DSP Processor — Used Closeout","description":"\u003ch2\u003eMosconi ATOMO 4|6 DSP Processor\u003c\/h2\u003e\u003cp\u003eNeed real DSP tuning but do not have much room left in the install? That is exactly where the ATOMO 4|6 makes sense. It gives you four analog inputs and six processed analog outputs in a chassis that is only 86 × 65 × 34 mm. For a factory-integration job or a compact aftermarket system that needs proper crossover control, equalization, time alignment and phase adjustment, you get the tuning tools without having to find space for a full-size processor.\u003c\/p\u003e\u003cp\u003eThe four analog inputs can accept high-level or low-level signal, so we can use it behind a compatible factory source or with an aftermarket radio. It also has an optical S\/PDIF input, and the card connection supports compatible Mosconi Bluetooth and expansion options. If four analog inputs are not enough, the compatible EXT4HLin module can expand the processor to eight analog inputs while the ATOMO still provides six processed analog outputs.\u003c\/p\u003e\u003cp\u003eThis is also a good fit when the system needs tuning control, not more amplifier channels. The ATOMO 4|6 is a stand-alone DSP, so it goes between the source and the amplifiers. The 64-bit DSP platform includes Mosconi dISC functions, and the software provides the processing needed to set up crossover points, EQ, time delay and phase. An optional RTC can be connected directly for master volume, subwoofer level or input-volume control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a DSP amplifier and it does not power speakers. It has six processed analog outputs, so if the system needs more than six DSP output channels, this is not the processor we would build around. Additional Bluetooth, CAN and analog-input expansion functions require the compatible Mosconi accessories; they are not built into the base processor.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAnalog inputs: 4 high-level \/ low-level channels\u003c\/li\u003e\n\u003cli\u003eAnalog DSP outputs: 6 × 2 V RMS\u003c\/li\u003e\n\u003cli\u003eLow-level input sensitivity: 2 V RMS\u003c\/li\u003e\n\u003cli\u003eHigh-level input sensitivity: 12 V RMS by default\u003c\/li\u003e\n\u003cli\u003eDigital input: optical TOSLINK \/ S\/PDIF\u003c\/li\u003e\n\u003cli\u003eExpansion: CARD connection for compatible Mosconi modules and extension cards\u003c\/li\u003e\n\u003cli\u003eAnalog-input expansion: up to 8 channels with compatible EXT4HLin\u003c\/li\u003e\n\u003cli\u003eDSP platform: 294.912 MHz, 64-bit\u003c\/li\u003e\n\u003cli\u003eADC: 48 kHz \/ 24-bit, 107 dB signal-to-noise ratio\u003c\/li\u003e\n\u003cli\u003eDAC: 48 kHz \/ 24-bit, 106 dB signal-to-noise ratio\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 8–32 V\u003c\/li\u003e\n\u003cli\u003eUSB operating voltage: 5 V\u003c\/li\u003e\n\u003cli\u003eExternal fuse: 3 A\u003c\/li\u003e\n\u003cli\u003eCurrent consumption: 0.14 A at 12 V\u003c\/li\u003e\n\u003cli\u003eHigh-level autosense turn-on: available with BTL source\u003c\/li\u003e\n\u003cli\u003eOptional remote control: RTC\u003c\/li\u003e\n\u003cli\u003eDimensions: 86 × 65 × 34 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 180 g\u003c\/li\u003e\n\u003cli\u003eFinish: black anodized\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eManufacturer Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e64-bit DSP platform with dISC functions\u003c\/li\u003e\n\u003cli\u003eIntegrated measurement functions for RTA, time delay and phase\u003c\/li\u003e\n\u003cli\u003eEasy Setup function\u003c\/li\u003e\n\u003cli\u003eDirect RTC connection for volume, subwoofer level or input-volume control\u003c\/li\u003e\n\u003cli\u003eCompatible with supported Mosconi Bluetooth, CAN and input-expansion accessories\u003c\/li\u003e\n\u003cli\u003eCompatible with 12 V and 24 V vehicle electrical systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFinal sale:\u003c\/strong\u003e This closeout item is final sale. Review the exact condition, fitment and included accessories before purchase.\u003c\/p\u003e","brand":"Mosconi","offers":[{"title":"Used Closeout","offer_id":51439767027945,"sku":"USED-MOSCONI-ATOMO-4-6-DSP","price":274.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/mosconi-atomo-4-6-dsp-used-closeout.jpg?v=1782267964"},{"product_id":"used-xs-power-li-s680-12v-lifepo4-battery","title":"XS Power Li-S680 12V LithiumFit+ LiFePO4 Battery — Used","description":"\u003ch2\u003eXS Power Li-S680 12V LithiumFit+ LiFePO4 Battery\u003c\/h2\u003e\u003cp\u003eNeed a lot of 12-volt current without adding the weight of a conventional AGM battery? That is where the Li-S680 makes sense. This compact LiFePO4 battery weighs about 5 pounds and is built for high-current starting and performance applications, so it can also make sense in a properly designed car-audio electrical system when the vehicle and charging system are compatible with lithium.\u003c\/p\u003e\u003cp\u003eThis particular Li-S680 is used and was pulled from a working build. The photos show the actual battery you are buying, including the label and normal cosmetic marks from installation. Resting voltage was checked when it was listed. For a build where the battery size, weight and current capability fit the plan, this is a way to get into an XS Power lithium battery without paying new-battery money.\u003c\/p\u003e\u003cp\u003eThe specifications below are the ratings printed on the label of this photographed used Li-S680. They apply to this exact battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a drop-in replacement for every 12-volt battery system. The alternator, charging voltage and charger must be compatible with LiFePO4 chemistry, and the label on this battery states that charge voltage must not exceed 14.6 V. Because this is a used battery, resting voltage does not guarantee that remaining capacity or cycle life is the same as a new battery.\u003c\/p\u003e\u003ch3\u003eSpecifications for This Used Li-S680\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBattery chemistry: LiFePO4 \/ lithium iron phosphate\u003c\/li\u003e\n\u003cli\u003eNominal system voltage: 12 V\u003c\/li\u003e\n\u003cli\u003eManufacturer-rated power: 3000 watts\u003c\/li\u003e\n\u003cli\u003eMaximum output: 1200 A\u003c\/li\u003e\n\u003cli\u003eCranking amps: 600 A\u003c\/li\u003e\n\u003cli\u003eLead-acid-equivalent cranking amps: 900 A\u003c\/li\u003e\n\u003cli\u003eCapacity: 13 Ah\u003c\/li\u003e\n\u003cli\u003eLead-acid-equivalent capacity: 39 Ah\u003c\/li\u003e\n\u003cli\u003eEnergy: 165 Wh\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5 lb\u003c\/li\u003e\n\u003cli\u003eDimensions: approximately 7.13 × 3.03 × 6.57 inches\u003c\/li\u003e\n\u003cli\u003eTerminal hardware: M6\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCharging and Installation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBattery-label maximum charge voltage: 14.6 V\u003c\/li\u003e\n\u003cli\u003eUse a charging system and charger compatible with LiFePO4 batteries\u003c\/li\u003e\n\u003cli\u003eDo not use a charger with a lead-acid desulfation mode\u003c\/li\u003e\n\u003cli\u003eVerify vehicle charging voltage before installation\u003c\/li\u003e\n\u003cli\u003eCorrect fusing, cable size and mounting are required for the application\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XS Power","offers":[{"title":"Default Title","offer_id":51703352393961,"sku":"USED-LI-S680","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/xs-power-li-s680-used-front.jpg?v=1787333945"},{"product_id":"used-ssv-works-ss-f65u-slingshot-speaker-pods","title":"SSV Works SS-F65U Polaris Slingshot 6.5-Inch Front Speaker Pods — Used","description":"\u003ch2\u003eSSV Works SS-F65U Polaris Slingshot 6.5-Inch Front Speaker Pods — Pair\u003c\/h2\u003e\u003cp\u003eWant better front speakers in a Polaris Slingshot without building fiberglass kick panels from scratch? That is what the SS-F65U pods solve. They give you a vehicle-shaped front enclosure for 6.5-inch aftermarket speakers, putting the speaker in the front side-panel \/ footwell area instead of forcing a generic pod into a space it was never designed for.\u003c\/p\u003e\u003cp\u003eSSV Works built the SS-F65U as an unloaded enclosure, so you choose the speakers that make sense for the rest of the system. The pods use fiberglass construction with a black textured finish and are designed around the factory front-side-panel area. That gives you a much better starting point for a real front stage than hanging a small universal enclosure off the frame.\u003c\/p\u003e\u003cp\u003eThis listing is for the actual used pair pictured, and these pods were removed from a 2020 Polaris Slingshot. For any other model year, compare the pod shape and mounting points to the vehicle before treating fitment as guaranteed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat they will not do:\u003c\/strong\u003e these are unloaded speaker pods; speakers are not included. They also do not guarantee that every 6.5-inch speaker will fit just because the nominal diameter matches. Basket shape, mounting depth, grille clearance and mounting-hole dimensions still need to work with the pod. Hardware or accessories not shown with the actual used pair are not included.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: SS-F65U \/ 170-SS-F65U\u003c\/li\u003e\n\u003cli\u003eProduct type: vehicle-specific front speaker pods\u003c\/li\u003e\n\u003cli\u003eSpeaker size: 6.5-inch aftermarket speakers\u003c\/li\u003e\n\u003cli\u003eEnclosure type: unloaded\u003c\/li\u003e\n\u003cli\u003eConstruction: fiberglass\u003c\/li\u003e\n\u003cli\u003eFinish: black textured\u003c\/li\u003e\n\u003cli\u003eKnown donor application for this pair: 2020 Polaris Slingshot\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded With This Used Pair\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLeft and right SSV Works SS-F65U front speaker pods\u003c\/li\u003e\n\u003cli\u003eInstalled wiring leads shown in the actual photos\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e speakers, grilles, amplifier or mounting hardware not shown in the actual photos.\u003c\/p\u003e","brand":"SSV Works","offers":[{"title":"Default Title","offer_id":51703358914793,"sku":"USED-SSV-SS-F65U","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/used-ssv-works-ss-f65u-slingshot-speaker-pods-pair_52c5a0e5-287e-4b58-9b4f-cfaf82bad007.jpg?v=1787334245"},{"product_id":"used-kicker-48kmxl65-short-horn-speakers-pair","title":"KICKER 48KMXL65 6.5-Inch KMXL Horn-Loaded Speakers — Pair — Used, Short Horns, No Grilles","description":"\u003ch2\u003eKICKER 48KMXL65 6.5-Inch KMXL Horn-Loaded Speakers — Pair\u003c\/h2\u003e\u003cp\u003eNeed a 6.5-inch speaker that can still be heard once the bike, UTV or boat is moving and wind, road and engine noise start covering up a normal coaxial? That is exactly where the KMXL65 makes sense. KICKER combines a 6.5-inch marine-grade woofer with a horn-loaded compression tweeter so the system can stay clear and present at higher output levels instead of disappearing as soon as the environment gets loud.\u003c\/p\u003e\u003cp\u003eKICKER rates the KMXL65 at 15–150 watts RMS per speaker with 92 dB sensitivity and a 90 Hz–20 kHz frequency response. That gives you the efficiency needed for motorcycles, powersports and marine systems without asking one small speaker to do the job of a subwoofer. For maximum power handling, KICKER recommends an 80 Hz high-pass crossover at 12 dB\/octave.\u003c\/p\u003e\u003cp\u003eThis used pair has the short horn pieces installed as shown in the actual photo. That can help in a tighter custom location where the full retail configuration is not what the build needs. There are no grilles with this pair, so plan the finished mounting location accordingly if the cones will be exposed to road, trail or cargo-area debris.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat they will not do:\u003c\/strong\u003e these are not subwoofers or deep-bass drivers. They are built to give you strong upper-bass, midrange and high-frequency output in loud environments. This pair also does not include the white or charcoal grilles that come with a new retail KMXL65 set, and it does not include accessories that are not shown with the actual used pair.\u003c\/p\u003e\u003ch3\u003eManufacturer Specifications — Per Speaker\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: 48KMXL65\u003c\/li\u003e\n\u003cli\u003eWoofer size: 6.5 inches \/ 160 mm\u003c\/li\u003e\n\u003cli\u003eTweeter size: 1.25 inches \/ 32 mm\u003c\/li\u003e\n\u003cli\u003eTweeter dome material: aluminum\u003c\/li\u003e\n\u003cli\u003eRated impedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 15–150 watts RMS\u003c\/li\u003e\n\u003cli\u003ePeak power handling: 300 watts\u003c\/li\u003e\n\u003cli\u003eSensitivity: 92 dB (1 W \/ 1 m)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 90 Hz–20 kHz\u003c\/li\u003e\n\u003cli\u003eMounting-hole diameter: 5-7\/16 inches \/ 139 mm\u003c\/li\u003e\n\u003cli\u003eMounting depth: 3-3\/16 inches \/ 81 mm\u003c\/li\u003e\n\u003cli\u003eRecommended crossover for maximum power handling: 80 Hz high-pass, 12 dB\/octave\u003c\/li\u003e\n\u003cli\u003eEnvironmental rating: IP66\u003c\/li\u003e\n\u003cli\u003eIntegrated multi-color LED lighting\u003c\/li\u003e\n\u003cli\u003eUV-treated waterproof poly\/carbon-fiber woofer cone\u003c\/li\u003e\n\u003cli\u003eNeodymium motor structure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded With This Pair\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo used KICKER 48KMXL65 speakers\u003c\/li\u003e\n\u003cli\u003eShort horn pieces installed as pictured\u003c\/li\u003e\n\u003cli\u003eAttached wiring and inline crossover sections shown in the actual photo\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e white grilles, charcoal grilles, mounting hardware, retail packaging or accessories not shown.\u003c\/p\u003e","brand":"SMS Car Audio","offers":[{"title":"Default Title","offer_id":51703370711273,"sku":"USED-48KMXL654-SHORT-NOGRILLE","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/used-kicker-48kmxl65-short-horn-no-grilles-pair.jpg?v=1787334630"},{"product_id":"used-itm-sensoraid-08001-tpms-programming-tools-lot-of-2-itm-uni-sensors","title":"ITM SensorAID 08001 TPMS Programming Tools — Lot of 2 with Uni-Sensors — Used","description":"\u003ch2\u003eITM SensorAID 08001 TPMS Programming Tools — Lot of 2 + Uni-Sensors\u003c\/h2\u003e\u003cp\u003eNeed a TPMS tool that can read a bad sensor, copy an existing sensor ID and program compatible ITM Uni-Sensors without stocking a different replacement sensor for every vehicle? That is what the SensorAID 08001 was built to do. This used lot includes two SensorAID tools plus the ITM Uni-Sensors and accessories shown in the actual photos, so it makes the most sense for a tire shop, installer or technician who already works with the ITM TPMS platform.\u003c\/p\u003e\u003cp\u003eThe 08001 can scan compatible TPMS sensors for diagnostic information and program blank ITM Uni-Sensors. Its copy\/clone function can duplicate a compatible original sensor ID, which can simplify replacement work because the vehicle may not need to learn a completely new sensor ID in applications where cloning is supported. The included 08016D Uni-Sensors are multi-frequency replacement sensors that must be programmed with a compatible ITM programmer before use.\u003c\/p\u003e\u003cp\u003eThis is also a practical backup-tool lot. You are getting two programmers rather than one, along with the sensors pictured, so one can stay at a second work area or serve as a spare if you already use SensorAID equipment. USB connectivity supports the tool's software\/service functions where the installed software revision and ITM support allow it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat it will not do:\u003c\/strong\u003e this is not a guarantee of current coverage for every year, make and model. Vehicle coverage, relearn procedures and software support depend on the tool's software revision and the application. Programming functions are intended for compatible ITM Uni-Sensors, and OBDII relearn functions require the appropriate compatible OBDII hardware; do not assume an OBDII interface is included unless it is shown in the actual listing photos.\u003c\/p\u003e\u003ch3\u003eTool Functions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: ITM SensorAID 08001\u003c\/li\u003e\n\u003cli\u003eReads compatible TPMS sensors for diagnostic information\u003c\/li\u003e\n\u003cli\u003eCopies \/ clones compatible original sensor IDs\u003c\/li\u003e\n\u003cli\u003ePrograms compatible blank ITM Uni-Sensors\u003c\/li\u003e\n\u003cli\u003eUSB connection for supported software and service functions\u003c\/li\u003e\n\u003cli\u003eSupports TPMS service across compatible 315 MHz and 433 MHz applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded in This Used Lot\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo used ITM SensorAID 08001 TPMS programming \/ diagnostic tools\u003c\/li\u003e\n\u003cli\u003eHard cases and accessories shown in the actual photos\u003c\/li\u003e\n\u003cli\u003eITM 08016D rubber-valve Uni-Sensor TPMS sensors shown in the actual photos\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ITM","offers":[{"title":"Complete Lot — 2 SensorAID 08001 Tools + Uni-Sensors","offer_id":51703401054441,"sku":"USED-ITM-08001-LOT","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/used-itm-sensoraid-08001-tpms-case.jpg?v=1787336450"},{"product_id":"used-rogue-car-audio-rst-4ω-neodymium-super-tweeters-pair","title":"Rogue Car Audio RST Neodymium Super Tweeters — Pair — Used","description":"\u003ch2\u003eRogue Car Audio RST 4-Ohm Neodymium Super Tweeters — Pair\u003c\/h2\u003e\u003cp\u003eHave plenty of midrange output but the top end gets buried once the system is turned up? That is where a super tweeter like the Rogue RST fits. It is built to add high-frequency output above a loud midrange section so vocals, cymbals and detail do not disappear when the rest of the system starts playing hard.\u003c\/p\u003e\u003cp\u003eThe RST uses a neodymium motor and a PEI\/polymer diaphragm in a compact bullet-style tweeter. Rogue rates the RST at 80 watts RMS and 4 ohms per tweeter. The neodymium motor keeps the assembly compact, which makes this style useful in custom door panels, stunt walls and other multi-speaker layouts where there is not much room left once the mids are in place.\u003c\/p\u003e\u003cp\u003eThis listing is for the actual used pair pictured. Both tweeters have been tested and are working, and the rear labels confirm the 4-ohm \/ 80-watt RMS RST configuration. They show normal cosmetic wear from prior installation, so this pair makes the most sense when the job is about adding the correct high-frequency section rather than paying for new retail cosmetics.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat they will not do:\u003c\/strong\u003e these are dedicated super tweeters, not full-range speakers and not replacements for the midrange section. They need to be crossed over correctly for high-frequency use and matched to the amplifier and the rest of the system. Do not treat the 80-watt RMS rating as permission to send them full-range power.\u003c\/p\u003e\u003ch3\u003eSpecifications — Per Tweeter\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: RST\u003c\/li\u003e\n\u003cli\u003eProduct type: neodymium super tweeter\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 ohms\u003c\/li\u003e\n\u003cli\u003ePower handling: 80 watts RMS\u003c\/li\u003e\n\u003cli\u003eDiaphragm: PEI \/ polymer\u003c\/li\u003e\n\u003cli\u003eMagnet material: neodymium\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded With This Pair\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo used Rogue Car Audio RST tweeters\u003c\/li\u003e\n\u003cli\u003eActual pair pictured\u003c\/li\u003e\n\u003cli\u003eBoth tested and working\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rogue Car Audio","offers":[{"title":"Default Title","offer_id":51717996937449,"sku":"USED-ROGUE-RST-4OHM-PAIR","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/rogue-rst-4ohm-used-tweeters-front.jpg?v=1787605553"},{"product_id":"used-nintendo-switch-v2-bundle-17-games","title":"Nintendo Switch V2 Bundle — 17 Games, Case \u0026 Charger — Used","description":"\u003cp\u003e\u003cstrong\u003eUsed Nintendo Switch V2 Bundle with 17 Physical Games, Charger \u0026amp; Cases\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a complete \u003cstrong\u003epre-owned Nintendo Switch V2 bundle\u003c\/strong\u003e in excellent condition. The console works perfectly and has been well cared for. Included are the Nintendo Switch V2 console, Neon Blue and Neon Red Joy-Con controllers, Nintendo AC adapter\/charger, carrying case, protective console case, and \u003cstrong\u003e17 physical Nintendo Switch games\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe photos show the actual console, accessories and games included in this exact bundle. No stock photos. Sold only as one complete bundle.\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003eConsole \u0026amp; Accessories Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNintendo Switch V2 console\u003c\/li\u003e\n\u003cli\u003eNeon Blue left Joy-Con\u003c\/li\u003e\n\u003cli\u003eNeon Red right Joy-Con\u003c\/li\u003e\n\u003cli\u003eNintendo Switch AC adapter \/ charger\u003c\/li\u003e\n\u003cli\u003eBlack zippered carrying case\u003c\/li\u003e\n\u003cli\u003eProtective console case\u003c\/li\u003e\n\u003cli\u003e17 physical Nintendo Switch games\u003c\/li\u003e\n\u003cli\u003e10 games with cases\u003c\/li\u003e\n\u003cli\u003e7 cartridge-only games\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGames With Cases\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDiablo III: Eternal Collection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLEGO Brawls\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuper Smash Bros. Ultimate\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSuper Mario Odyssey\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGhostrunner\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eJumanji: The Video Game\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMario + Rabbids Kingdom Battle\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSonic Colors: Ultimate\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNinja Gaiden: Master Collection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 additional cased Nintendo Switch game shown in the clear case\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCartridge-Only Games\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eStubbs the Zombie in Rebel Without a Pulse\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSonic Mania\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndivisible\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThe Legend of Zelda: Link's Awakening\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMonopoly for Nintendo Switch\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDragon Ball FighterZ\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGas Guzzlers Extreme\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCondition\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Used \/ Pre-Owned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall condition:\u003c\/strong\u003e Excellent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Everything works perfectly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCare:\u003c\/strong\u003e Well cared for\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCosmetics:\u003c\/strong\u003e Normal minor signs of prior use may be present; review the actual-item photos for exact condition\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBundle Highlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete Nintendo Switch setup ready for a new owner\u003c\/li\u003e\n\u003cli\u003e17 physical games included\u003c\/li\u003e\n\u003cli\u003ePopular Nintendo, Mario, Zelda, Sonic, fighting, action and family titles\u003c\/li\u003e\n\u003cli\u003eNeon Red \/ Neon Blue Joy-Con controllers\u003c\/li\u003e\n\u003cli\u003eCharger included\u003c\/li\u003e\n\u003cli\u003eCarrying case and protective case included\u003c\/li\u003e\n\u003cli\u003eActual-item photography\u003c\/li\u003e\n\u003cli\u003eSold as a complete bundle only\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eQuantity: 1 — once sold, this exact used bundle is gone\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eNintendo, Nintendo Switch, Joy-Con and all game titles are trademarks of their respective owners. This is a pre-owned resale item and is not represented as new.\u003c\/em\u003e\u003c\/p\u003e","brand":"Nintendo","offers":[{"title":"Default Title","offer_id":51745805959401,"sku":"USED-NINTENDO-SWITCH-V2-17G","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/files\/used-nintendo-switch-v2-bundle-17-games-pixel-cleaned_b80e76ca-2b7b-4ea2-a62e-90fc4e7abd94.png?v=1787866270"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0311\/8134\/0811\/collections\/clearance-sales_b774e098-d9da-4048-868e-c9f091b507f7.webp?v=1789013882","url":"https:\/\/smscaraudio.com\/collections\/used-car-audio-equipment.oembed","provider":"SMS Car Audio","version":"1.0","type":"link"}