SMS Car Audio

Sundown Audio E Series V.4 E10 10" (500-watts)-dvc-4ohm

Sundown Audio E Series V.4 E10 10 (500-watts)-dvc-4ohm

$139.99

Sundown Audio E10 D4 V4: 

This design features a newly tooled, significantly stronger frame meant to resemble the cast frame on the SA v.2 and U series models.

The under-spider venting has been upgraded to one of our tooled vent rings to enhance long-term power handling.
And, much like the very last of the v.3 series, the motor is fully bolted.
Otherwise, it is largely the same as the outgoing v.3 and is priced identically.


Features & Technology:

  • Xmax = 14mm one-way by 70% BL
  • RMS Power = 500-watts
  • Vented magnetic gap
  • Solid Pole piece with chamfered edges for increased air powered voice coil cooling
  • Black Aluminum 2” voice coil former for superior heat dissipation
  • High Temperature copper voice coil wire
  • Spring Loaded Terminals
  • Stitched-On Tinsel Leads to prevent fatigue and failure
  • High strength stamped steel frame
  • Optimized for small, sealed & ported enclosures

Features & Technology:

  • Xmax = 14mm one-way by 70% BL
  • RMS Power = 300-watts
  • Vented magnetic gap
  • Solid Pole piece with chamfered edges for increased air-powered voice coil cooling
  • Black Aluminum 2” voice coil former for superior heat dissipation
  • High-Temperature copper voice coil wire
  • Spring Loaded Terminals
  • Stitched-On Tinsel Leads to prevent fatigue and failure
  • High strength stamped steel frame
Specifications E10 v.4 D2 E10 v.4 D4
RE (ohms) 3.80 5.80
FS (Hz) 33.20hz 33.59hz
Vas (L) 29.835 30.176
Qes 0.364 0.444
Qms 5.507 3.647
Qts 0.341 0.396
BL (NA) 16.268 17.987
Mms (Grams) 121.502 117.288
Cms (uM/N) 189.144 191.309
Sens (1w/1m) 86.6dB 86.0dB

 

E10 v.2
Sealed 0.5 ft^3
Ported 1.0 ft^3
Displacement 0.11 ft^3
Depth 5 5/8"
Outside Diameter 10"
Cut-Out 8 7/8"
Recommended Tuning 32hz
Recommended Port Area 16 in^2

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods