🏷️ SOLD IN-STORE ONLY — AUTHORIZED DEALER
📞 Call, 💬 Text, or ✉️ Email to verify availability — some items may require special order.
Contact SMS Car Audio to Check Stock or Place Your Order
📞 Call (504) 289-8127 💬 Text (504) 289-8127 ✉️ Email al@smscaraudio.com 📍 Get Directions
Description
Description
The Nighthawk isn't just another amp—it’s built premium from the ground up. Every detail has been carefully engineered, with countless hours spent refining its design to deliver the kind of sound that hits hard and stays sharp, no matter the conditions.
Powered by a cutting-edge Class D driver and Infineon output stages, the Nighthawk brings serious performance to your setup. It’s built specifically as a bass amplifier and crushes power ratings at 40Hz—built to keep up with long rides and loud roads without missing a beat.
Whether you're a weekend cruiser or drive every day, the Nighthawk is made to deliver. Professional-grade sound, rugged design, and all the power you need to fuel your ride—this is the real deal.
Features
DC Auto Detect Turn On
Speaker Connection by High Current Plug
Selectable Ohm Load Stability
Stereo/Mono Switch allows single input operation.
Start Stop compatible.
Compatible with charging systems up to 17 Volts.
Variable Speed Ball Bearing Fan Cooling
Stereo Power @ 14.4V-1% THD All Channels Driven
4 Ohm = 250 Watts x 2
2 Ohm = 400 Watts x 2
1 Ohm = 400 Watts x 2
Bridged
4 Ohm = 800 Watts x 1
2 Ohm = 800 Watts x 1
Distortion
Below 0.02% THD from 100mW to 200 Watts
Best THD 0.005% 2 Watts to 20 Watts
THD 20Hz to 20KHz (1 Watt) .009%
Signal to Noise Ratio
-88dB Referenced to 1 Watt (2V)
-113dB Reference to Full Power (31.5V)
Crossover
55Hz -500Hz 12dB Per Octave
Highpass, Lowpass Full Range
State variable filters
Linkwitz Riley
Bandwidth
10Hz to 20KHz (-1dB)
10Hz to 32KHz (-3dB)
Operating Voltage
10.5VDC – 17.1VDC
Low voltage warning light
11.4VDC
Start Stop Voltage
4.6VDC
Gain Range
150mV – 5.25V
Input Type
Balanced
Operating Temperature
-4F – 180F (-20C -- 82C)
Fuses
3 x 30A
Type Mini ATM
Dimensions
10.35”(L) x 6”(W) x 2”(H)
260mm(L) x 152mm(W) x 51mm(H)
Powered by a cutting-edge Class D driver and Infineon output stages, the Nighthawk brings serious performance to your setup. It’s built specifically as a bass amplifier and crushes power ratings at 40Hz—built to keep up with long rides and loud roads without missing a beat.
Whether you're a weekend cruiser or drive every day, the Nighthawk is made to deliver. Professional-grade sound, rugged design, and all the power you need to fuel your ride—this is the real deal.
Features
DC Auto Detect Turn On
Speaker Connection by High Current Plug
Selectable Ohm Load Stability
Stereo/Mono Switch allows single input operation.
Start Stop compatible.
Compatible with charging systems up to 17 Volts.
Variable Speed Ball Bearing Fan Cooling
Stereo Power @ 14.4V-1% THD All Channels Driven
4 Ohm = 250 Watts x 2
2 Ohm = 400 Watts x 2
1 Ohm = 400 Watts x 2
Bridged
4 Ohm = 800 Watts x 1
2 Ohm = 800 Watts x 1
Distortion
Below 0.02% THD from 100mW to 200 Watts
Best THD 0.005% 2 Watts to 20 Watts
THD 20Hz to 20KHz (1 Watt) .009%
Signal to Noise Ratio
-88dB Referenced to 1 Watt (2V)
-113dB Reference to Full Power (31.5V)
Crossover
55Hz -500Hz 12dB Per Octave
Highpass, Lowpass Full Range
State variable filters
Linkwitz Riley
Bandwidth
10Hz to 20KHz (-1dB)
10Hz to 32KHz (-3dB)
Operating Voltage
10.5VDC – 17.1VDC
Low voltage warning light
11.4VDC
Start Stop Voltage
4.6VDC
Gain Range
150mV – 5.25V
Input Type
Balanced
Operating Temperature
-4F – 180F (-20C -- 82C)
Fuses
3 x 30A
Type Mini ATM
Dimensions
10.35”(L) x 6”(W) x 2”(H)
260mm(L) x 152mm(W) x 51mm(H)