POLARIS SLINGSHOT UNDER DASH 2 X 6.5" SUBWOOFER ENCLOSURE WITH 2 X ZR6.4D FOR 2015 TO 2019

No reviews

Price:
Sale price$299.95

Shipping calculated at checkout

Description

DS18 SLG-UDSD6LD Polaris Slingshot Under Dash 2 x 6" Subwoofer Enclosure with 2 x ZR6.4D

There’s no better way to pack some punchy BASS in your Polaris Slingshot’s sound system than DS18’s easy to install SLG-UDSD6LD!

The installation of DS18’s LOADED Under Dash Enclosure into your Polaris Slingshot’s sound system significantly boosts the bass reproduced by your sound system through precise stereo imaging and state-of-the-art subwoofers.

This enclosure houses two of DS18’s bestselling ZR6.4D’s: subwoofers that can handle intense power and deliver clean bass you can feel. This sealed enclosure is placed underneath your dash so you can feel the sound reproduced by your subwoofers.

AMPLIFIER REQUIRED FOR POWERING THESE COMPONENTS (SOLD SEPARATELY - NXL-X1000.1D RECOMMENDED)

The SLG-UDSD6LD is also completely protected from damage that could be caused by the Slingshot’s Open Air Design with UV Resistant and Waterproof durable mold injected plastic that’s made to last.

This durable waterproof enclosure also utilizes Coated Metal Brackets for increased resistance against the elements so your components are guaranteed to outlast the vehicle’s you install them in.

There’s no better way to pack some punch in your Polaris Slingshot’s sound system than DS18’s SLG-UDSD6LD!

Highlights

  • Two 6.5” ZR6.4D Subwoofers Included
  • 1 Ohm Total Load Impedance
  • Easy to Install – All Hardware and Wiring Included
  • OFC Tinned 12Ga Wiring For More Power Handling and Durability
  • Fits Slingshot Models from 2015 or Later
  • Coated Metal Bracket for Better Resistance to the Elements
  • Durable (PE) Waterproof Enclosure with UV Protection
  • 0.3ft3 / 8.5L Sealed Type Enclosure
  • Damping Material for Better Subwoofer Performance
  • Black OEM Finish

Great For

  • Polaris Slingshot 2015+
Technical Details 
           Download SLG-UDSD6LD Product Manual
GENERAL  
Speaker Size 2 x 6.5"
Total Impedance 1 Ohms
Total RMS Power Handling  600W
Total MAX Power Handling  1200W
Sensitivity (1w/1m)  90dB
Frequency Response 38Hz-200Hz
Recommended Lo Pass Crossover 120Hz
SPEAKER SPECIFICATIONS  
Voice Coil Diameter 1.5" / 38.8mm
Voice Coil Former Material  Aluminum
Winding Material  Copper
Cone Material Non-Pressed Paper
Dust Cap Material PPI
Surround Material Foam
Basket Material  Steel
Magnet Material Ferrite
Magnet Weight 50 Oz
BOX SPECIFICATIONS  
Internal Volume 0.3ft3 / 8.5L
Load Configuration Parallel
Box Type Sealed
Box Material Polyethylene (PE)
Finish Material Black
-3Db Dropping Point (F3) 42Hz
UV Protection Yes
Waterproof Rating IP65
MEASUREMENT  
Overall Height 6" / 152.4mm
Overall Width 14.6" / 372mm
Overall Depth 7.2" / 183mm



You May Also Like

Recently Viewed Products