Description
10" 4Ω Free-Air Marine Subwoofer
The KICKER® KMF 10-inch Marine Subwoofer makes serious bass - no enclosure necessary! Made to take the power and the weather, this sub is custom made to bang in your boat.
PARTY TIME
Packed with features and made for specifically for marine use, KICKER gives you the deep, loud bass your boat needs.
FEATURES
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
*The KMF 10-inch Subwoofer works best with 175 watts of recommended power. See below for more details.
Specifications
| Thiele/Small Parameters |
| Woofer(in,mm) |
| 10, 25 |
| Impedance (OHMS) |
| 4 SVC |
| Peak Power (watts, per ANSI/CTA-2031-A) |
| 350 |
| Recommended Amplifier Power (watts RMS) |
| 175 |
| Sealed Enclosure Volume Min-Max(ft³, L) |
| N/A |
| Vented Enclosure Volume Min-Max(ft³, L) |
| N/A |
| Frequency Response(Hz) |
| 30-500 |
| Mounting Depth(in, cm) |
| 5, 12.7 |
| Hole Diameter(in, cm) |
| 9-3/16, 23.2 |
| Outer Diameter(in, cm) |
| 10-11/16, 27.1 |
| What's in the Box: |
| 1 - 10" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual |