Description
FRP-1.5K/BL — 1,500W RMS / Blue
This is the entry FRP full-range monoblock: enough power for a serious single-channel section without jumping straight into the current demand of the 2.5K-and-up models. DS18 rates it 500W @ 4Ω, 900W @ 2Ω and 1,500W @ 1Ω.
WHY PICK IT
Choose the 1.5K when the speaker bank/load actually needs roughly 1,500W at 1 ohm. DS18 publishes a 130A recommended system fuse, so this is still a real electrical load but materially easier to support than the 5K/8K/12K tier.
KEY DATA
• Full-range Class D mono • 1Ω minimum • 10Hz–20kHz • 0GA power input • Smart Cooling x2 • remote level control with clip indicator
Blue is the chassis finish only; output/specs match the Red and Titanium 1.5K variants.
This is the entry FRP full-range monoblock: enough power for a serious single-channel section without jumping straight into the current demand of the 2.5K-and-up models. DS18 rates it 500W @ 4Ω, 900W @ 2Ω and 1,500W @ 1Ω.
WHY PICK IT
Choose the 1.5K when the speaker bank/load actually needs roughly 1,500W at 1 ohm. DS18 publishes a 130A recommended system fuse, so this is still a real electrical load but materially easier to support than the 5K/8K/12K tier.
KEY DATA
• Full-range Class D mono • 1Ω minimum • 10Hz–20kHz • 0GA power input • Smart Cooling x2 • remote level control with clip indicator
Blue is the chassis finish only; output/specs match the Red and Titanium 1.5K variants.
AMPLIFIER SYSTEM FIT
Where this fits in the build
An amplifier should be chosen around the channels, load, speaker or subwoofer plan, available electrical support and how hard the system needs to play.
Plan aroundMatch usable channels and power to the actual speakers and load.
Match itPlan signal processing and gain structure before chasing wattage.
Finish itHigher output may require charging, battery and wiring upgrades.