Description
WR04P — 1/0 AWG to 4 AWG Amplifier Input Reducers — Pair
WR04P solves the common problem where the vehicle is correctly wired with 1/0-AWG power/ground cable but the amplifier only accepts 4-AWG terminals. It lets the large cable stay large through the vehicle and steps down only at the equipment connection instead of trimming strands or replacing the run.
SMS would use this pair for one amplifier—red on positive, black on ground. The reducer changes the physical termination size; it does not increase the current capacity of the amplifier's 4-AWG terminal. The fuse, cable and amplifier still have to be sized as a complete circuit.
MANUFACTURER SPECIFICATIONS
• Input cable: 1/0 AWG
• Output/terminal size: 4 AWG
• Quantity: One red/black pair
• Construction: Machined brass
• Finish: Marine-grade satin chrome
• Retention: Allen set screw; no crimp required
• Insulation: Red/black silicone covers
WR04P solves the common problem where the vehicle is correctly wired with 1/0-AWG power/ground cable but the amplifier only accepts 4-AWG terminals. It lets the large cable stay large through the vehicle and steps down only at the equipment connection instead of trimming strands or replacing the run.
SMS would use this pair for one amplifier—red on positive, black on ground. The reducer changes the physical termination size; it does not increase the current capacity of the amplifier's 4-AWG terminal. The fuse, cable and amplifier still have to be sized as a complete circuit.
MANUFACTURER SPECIFICATIONS
• Input cable: 1/0 AWG
• Output/terminal size: 4 AWG
• Quantity: One red/black pair
• Construction: Machined brass
• Finish: Marine-grade satin chrome
• Retention: Allen set screw; no crimp required
• Insulation: Red/black silicone covers