Description
DII600.1 — Compact Mono Amplifier — 700W RMS @ 1Ω
Choose the DII600.1 when the bass stage needs useful 1-ohm power but packaging matters more than chasing a four-digit model number. It is a good fit for a single efficient subwoofer or a modest dual-sub system whose final wiring lands at 1, 2 or 4 ohms.
SMS would use it when roughly 700 watts at 1 ohm is enough for the actual sub stage. If the woofer system naturally lands at 2 ohms and needs closer to 1,000 watts, DII1000.1 makes more sense. If the subs need substantially more power at 1 ohm, move up to DII1600.1 instead of running the 600.1 at its limit.
MANUFACTURER SPECIFICATIONS
• 265W RMS x1 @ 4Ω
• 465W RMS x1 @ 2Ω
• 700W RMS x1 @ 1Ω
• Frequency response: 10 Hz–250 Hz
• S/N: 100 dB
• Input sensitivity: 0.25–12V
• HPF/subsonic: 10–50 Hz
• LPF: 40–250 Hz
• Bass boost: 0–12 dB
• Remote bass control included
• Fuse rating: 50A
• Dimensions: 6.73 x 5.37 x 2.09 in
Choose the DII600.1 when the bass stage needs useful 1-ohm power but packaging matters more than chasing a four-digit model number. It is a good fit for a single efficient subwoofer or a modest dual-sub system whose final wiring lands at 1, 2 or 4 ohms.
SMS would use it when roughly 700 watts at 1 ohm is enough for the actual sub stage. If the woofer system naturally lands at 2 ohms and needs closer to 1,000 watts, DII1000.1 makes more sense. If the subs need substantially more power at 1 ohm, move up to DII1600.1 instead of running the 600.1 at its limit.
MANUFACTURER SPECIFICATIONS
• 265W RMS x1 @ 4Ω
• 465W RMS x1 @ 2Ω
• 700W RMS x1 @ 1Ω
• Frequency response: 10 Hz–250 Hz
• S/N: 100 dB
• Input sensitivity: 0.25–12V
• HPF/subsonic: 10–50 Hz
• LPF: 40–250 Hz
• Bass boost: 0–12 dB
• Remote bass control included
• Fuse rating: 50A
• Dimensions: 6.73 x 5.37 x 2.09 in
AMPLIFIER SYSTEM FIT
Where this fits in the build
An amplifier should be chosen around the channels, load, speaker or subwoofer plan, available electrical support and how hard the system needs to play.
Plan aroundMatch usable channels and power to the actual speakers and load.
Match itPlan signal processing and gain structure before chasing wattage.
Finish itHigher output may require charging, battery and wiring upgrades.