Description
SW10D2 — 10-Inch Echo Max Subwoofer — DVC 2Ω — 1000W RMS
SW10D2 is the 10-inch high-power SW option when the system needs serious bass output but the enclosure and vehicle favor a 10-inch driver over the larger SW12. Recoil’s current manufacturer data rates this exact model at 1000W RMS / 2000W peak with a 3-inch high-temperature voice coil and 115 oz ferrite motor.
Choose D2 when one sub needs to wire to 1Ω in parallel or 4Ω in series. SMS would match the amplifier and enclosure to this exact SW10 platform instead of using SW12 data simply because both are Echo Max models.
MANUFACTURER SPECIFICATIONS
• Size: 10 in
• Voice coils: Dual 2Ω
• Power handling: 1000W RMS / 2000W peak
• Voice coil: 3.0 in / 76.5 mm high-temperature design
• Cone: Glass-fiber composite
• Motor: 115 oz ferrite
• Sensitivity: 86.7 dB
• Frequency response: 38 Hz–500 Hz
• One D2 sub wires to 1Ω parallel or 4Ω series
SW10D2 is the 10-inch high-power SW option when the system needs serious bass output but the enclosure and vehicle favor a 10-inch driver over the larger SW12. Recoil’s current manufacturer data rates this exact model at 1000W RMS / 2000W peak with a 3-inch high-temperature voice coil and 115 oz ferrite motor.
Choose D2 when one sub needs to wire to 1Ω in parallel or 4Ω in series. SMS would match the amplifier and enclosure to this exact SW10 platform instead of using SW12 data simply because both are Echo Max models.
MANUFACTURER SPECIFICATIONS
• Size: 10 in
• Voice coils: Dual 2Ω
• Power handling: 1000W RMS / 2000W peak
• Voice coil: 3.0 in / 76.5 mm high-temperature design
• Cone: Glass-fiber composite
• Motor: 115 oz ferrite
• Sensitivity: 86.7 dB
• Frequency response: 38 Hz–500 Hz
• One D2 sub wires to 1Ω parallel or 4Ω series
BASS SYSTEM FIT
Where this fits in the build
The subwoofer is only one part of the bass system. Enclosure volume and alignment, final impedance, amplifier power, vehicle space and electrical support all affect the result.
Plan aroundChoose the bass target and usable space first.
Match itMatch the enclosure to the driver instead of treating the box as an afterthought.
Finish itMatch final load, amplifier and electrical support to the complete bass plan.