Description
CX65.2 — 6.5-Inch Coaxial Speaker — 2Ω — Pair
CX65.2 is the practical 6.5-inch fairing upgrade when the customer wants a complete full-range coaxial speaker without paying for CXX, CH or CHX output the system will not use. At 100W RMS with a shallow 2.26-inch mounting depth, it pairs well with moderate motorcycle amplifier power and tight factory locations.
SMS would use the 2-ohm version when the amplifier is stable at 2 ohms and the resulting channel power fits the CX65 rating. If the amp or wiring plan calls for 4 ohms, use CX65.4. If the customer needs substantially more road-speed output, move up the speaker family instead of simply overpowering the CX.
MANUFACTURER SPECIFICATIONS
• 6.5-inch coaxial speaker pair
• 2Ω
• 100W RMS / 200W max per speaker
• 94 dB average sensitivity
• Frequency response: 54 Hz–20 kHz ±5 dB
• Waterproof IMPP cone
• 1-inch PEI dome tweeter
• Built-in 6 dB crossover
• Mounting depth: 2.26 in / 57.4 mm
• Sold as a pair
CX65.2 is the practical 6.5-inch fairing upgrade when the customer wants a complete full-range coaxial speaker without paying for CXX, CH or CHX output the system will not use. At 100W RMS with a shallow 2.26-inch mounting depth, it pairs well with moderate motorcycle amplifier power and tight factory locations.
SMS would use the 2-ohm version when the amplifier is stable at 2 ohms and the resulting channel power fits the CX65 rating. If the amp or wiring plan calls for 4 ohms, use CX65.4. If the customer needs substantially more road-speed output, move up the speaker family instead of simply overpowering the CX.
MANUFACTURER SPECIFICATIONS
• 6.5-inch coaxial speaker pair
• 2Ω
• 100W RMS / 200W max per speaker
• 94 dB average sensitivity
• Frequency response: 54 Hz–20 kHz ±5 dB
• Waterproof IMPP cone
• 1-inch PEI dome tweeter
• Built-in 6 dB crossover
• Mounting depth: 2.26 in / 57.4 mm
• Sold as a pair
OPEN-AIR / MOTORCYCLE / POWERSPORTS FIT
Where this fits in the build
These speakers have to work where wind, road noise, mounting space and exposure change the job. Match the driver to the actual location, output target, amplifier power and environment instead of treating it like a normal door-speaker replacement.
Plan aroundConfirm mounting location, depth, cutout and how exposed the speaker will be.
Match itMatch efficiency, usable bandwidth and clean amplifier power to the output needed at speed or outdoors.
Finish itPlan crossover, mounting, wiring and electrical support with the complete open-air system.