OPEN-AIR / MOTORCYCLE / POWERSPORTS FIT
Where this fits in the build
These speakers have to work where wind, road noise, mounting space and exposure change the job. Match the driver to the actual location, output target, amplifier power and environment instead of treating it like a normal door-speaker replacement.
Plan aroundConfirm mounting location, depth, cutout and how exposed the speaker will be.
Match itMatch efficiency, usable bandwidth and clean amplifier power to the output needed at speed or outdoors.
Finish itPlan crossover, mounting, wiring and electrical support with the complete open-air system.
Description
PX65.4 — 6.5-Inch Neodymium Pro Coaxial Speakers — Pair
PX65.4 is the premium packaging choice when the system needs high-output mids/highs from one 6.5-inch location but motor weight and depth matter. The neodymium midrange motor and neodymium compression-horn tweeter keep the assembly lighter and shallower than a comparable ferrite pro coaxial while Recoil still rates it at 150W RMS.
SMS would choose PX over MX/HX when the 70 mm / 2.76-inch depth, lower motor mass and 95 dB sensitivity solve an actual door, pod or motorcycle-fabrication problem. Its published range starts at 110 Hz, so this is a mid/high section—not the model to choose if the customer expects the door speaker to provide deep midbass.
MANUFACTURER SPECIFICATIONS
• Sale unit: Pair (2 speakers)
• Nominal size: 6.5 in / 165 mm
• Configuration: Pro coaxial
• Power handling: 150 W RMS / 300 W peak
• Nominal impedance: 4 ohms
• Sensitivity: 95 dB
• Frequency response: 110 Hz–20 kHz
• Voice coil: 38.6 mm / 1.52 in, Kapton former
• Motor: Neodymium with shorting rings
• High-frequency section: Neodymium compression-horn tweeter
• Cone: Pressed paper fiber / water-resistant construction
• Mounting depth: 70 mm / 2.76 in
PX65.4 is the premium packaging choice when the system needs high-output mids/highs from one 6.5-inch location but motor weight and depth matter. The neodymium midrange motor and neodymium compression-horn tweeter keep the assembly lighter and shallower than a comparable ferrite pro coaxial while Recoil still rates it at 150W RMS.
SMS would choose PX over MX/HX when the 70 mm / 2.76-inch depth, lower motor mass and 95 dB sensitivity solve an actual door, pod or motorcycle-fabrication problem. Its published range starts at 110 Hz, so this is a mid/high section—not the model to choose if the customer expects the door speaker to provide deep midbass.
MANUFACTURER SPECIFICATIONS
• Sale unit: Pair (2 speakers)
• Nominal size: 6.5 in / 165 mm
• Configuration: Pro coaxial
• Power handling: 150 W RMS / 300 W peak
• Nominal impedance: 4 ohms
• Sensitivity: 95 dB
• Frequency response: 110 Hz–20 kHz
• Voice coil: 38.6 mm / 1.52 in, Kapton former
• Motor: Neodymium with shorting rings
• High-frequency section: Neodymium compression-horn tweeter
• Cone: Pressed paper fiber / water-resistant construction
• Mounting depth: 70 mm / 2.76 in