Description
LM65-4P — 6.5-Inch L3 Pro Midrange — 4 Ohm
LM65-4P is the shallow, straightforward 6.5-inch choice when the vehicle needs more midrange output than a factory-style speaker but does not have room for a deeper high-power pro driver. Its pressed-pulp/cotton-fiber cone, cloth surround and ferrite motor are aimed at vocal and instrument reproduction rather than deep midbass.
SMS would use the 6.5 when factory-size packaging wins over the extra cone area of LM8-4P. Recoil publishes 120W RMS, 88 dB sensitivity and a 137 Hz–12 kHz response, so this belongs above a properly chosen high-pass point with a subwoofer or midbass section carrying the frequencies below it.
MANUFACTURER SPECIFICATIONS
• Sale unit: Single speaker
• Nominal size: 6.5 in
• Power handling: 120 W RMS / 240 W peak
• Nominal impedance: 4 ohms
• Sensitivity: 88 dB
• Frequency response: 137 Hz–12 kHz
• Voice coil: 1.5 in / 38.5 mm
• Cone: Pressed pulp with cotton fibers; water-resistant coating
• Surround: Cloth
• Magnet: 19.2 oz ferrite
• Basket: Steel
LM65-4P is the shallow, straightforward 6.5-inch choice when the vehicle needs more midrange output than a factory-style speaker but does not have room for a deeper high-power pro driver. Its pressed-pulp/cotton-fiber cone, cloth surround and ferrite motor are aimed at vocal and instrument reproduction rather than deep midbass.
SMS would use the 6.5 when factory-size packaging wins over the extra cone area of LM8-4P. Recoil publishes 120W RMS, 88 dB sensitivity and a 137 Hz–12 kHz response, so this belongs above a properly chosen high-pass point with a subwoofer or midbass section carrying the frequencies below it.
MANUFACTURER SPECIFICATIONS
• Sale unit: Single speaker
• Nominal size: 6.5 in
• Power handling: 120 W RMS / 240 W peak
• Nominal impedance: 4 ohms
• Sensitivity: 88 dB
• Frequency response: 137 Hz–12 kHz
• Voice coil: 1.5 in / 38.5 mm
• Cone: Pressed pulp with cotton fibers; water-resistant coating
• Surround: Cloth
• Magnet: 19.2 oz ferrite
• Basket: Steel
OPEN-AIR / MOTORCYCLE / POWERSPORTS FIT
Where this fits in the build
These speakers have to work where wind, road noise, mounting space and exposure change the job. Match the driver to the actual location, output target, amplifier power and environment instead of treating it like a normal door-speaker replacement.
Plan aroundConfirm mounting location, depth, cutout and how exposed the speaker will be.
Match itMatch efficiency, usable bandwidth and clean amplifier power to the output needed at speed or outdoors.
Finish itPlan crossover, mounting, wiring and electrical support with the complete open-air system.